ISO PDF Download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...

12-01

Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...

12-01

Download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...

12-01

Download

BS ISO 5675:2021 pdf download

BS ISO 5675:2021 pdf download.Agricultural tractors and machinery — General purpose quick-action hydraulic couplers. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at https://www.iso.org/obp — IEC Electropedia: available at https://www.electropedia.org/ 3.1 coupler female part female part part that has a cavity to receive the male part 3.2 coupler...

12-01

Download

BS ISO 630‑4:2021 pdf download

BS ISO 630‑4:2021 pdf download.Structural steels Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates and wide flats. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies....

12-01

Download

BS ISO 630-1:2021 pdf download

BS ISO 630-1:2021 pdf download.Structural steels Part 1: General technical delivery conditions for hot-rolled products. 8.3 Selection and preparation of samples and test pieces 8.3.1 Sampling and sample preparation Sampling and sample preparation shall be in accordance with the requirements of ISO 377 and ISO 14284. 8.3.2 Preparation of samples and test pieces 8.3.2.1 General Requirements for the orientation of...

12-01

Download

BS EN ISO 6321:2021 pdf download

BS EN ISO 6321:2021 pdf download.Animal and vegetable fats and oils — Determination of melting point in open capillary tubes — Slip point. 5 Apparatus Usual laboratory apparatus and, in particular, the following. 5.1 Capillary tubes, having uniform walls and which are open at both ends, of internal diameter 0,9 mm to 1,2 mm, external diameter 1,2 mm to 1,6...

12-01

Download

BS ISO 23832:2021 pdf download

BS ISO 23832:2021 pdf download.Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions. 4 Principle This document describes three laboratory test methods: a) Method A: Sand burial degradation test; b) Method B: Sediment/seawater interface degradation test; and c) Method C: Seawater degradation test. These three test...

12-01

Download

BS ISO 5287:2021 pdf download

BS ISO 5287:2021 pdf download.Belt drives — V-belts for the automotive industry — Fatigue test. 6.1.4 Device, through which tension can be applied to the belt: a) in the case of the three-pulley test machine layout, an idler pulley (see Figure 1); b) in the case of the two-pulley test machine layout, a movable pulley (see Figure 2). 6.1.5 Means...

12-01

Download

BS EN 3572:2021 pdf download

BS EN 3572:2021 pdf download.Aerospace series — PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium — Product standard. 1 Scope This document specifies the dimensions of a hose assembly which is in accordance with ISO 7313. The hose assembly couples to the fittings specified in EN...

12-01

Download