BS EN 17092-4:2020 pdf free.Protective garments for motorcycle riders Class A garments – Requirements.
BS EN 17092-4 The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 1150:1999, Protective Clothing . Visibility clothing for non-professional use – Test methods and requirements EN 1621-1:2012, Motorcyclists’ protective clothing against mechanical impact – Part 1: Motorcyclits’ limb joint impact protectors – Requirements and test methods EN 1621-2:2014, Motorcyelists’ protective clothing against mechanical impact . Part 2: Motorcyclsts’ back protectors – Requirements and test methods
EN 1621-3:2018, Motorcyclists’ protective clothing against mechanical impact一Part 3: Motorcyclists’ chest protectors – Requirements and test methods EN 1621-4:2013, Motorcyclists’ protective clothing against mechanical impact . Part 4: Motorcyclists’ inflatable protectors – Requirements and test methods EN 13356:2001, Visbility acessories for non professional use一Test methods and requirements EN 13594:2015, Protective gloves for motorcycle riders – Requirements and test methods EN 13634:2017, Protective footwear for motorcycle riders – Requirements and test methods EN IS0 3377-1:2011, Leather – Physical and mechanical tests – Determination of tear load – Part 1: Single edge tear (ISO 3377-1:2011) EN ISO 13688:2013, Protective clothing – General requirements (ISO 13688:2013) EN ISO 4674-1:2016, Rubber- or plastics-coated fabrics . Determination of tear resistance . Part 1:Constant rate of tear methods (IS0 4674-1:2016) EN IS0 5077:2008, Textiles . Determination of dimensional change in washing and drying (ISO 5077:2007) EN 17092-1:2020, Protective garments for motorcyecle riders一Part 1: Test methods Where externally exposed permanent hard shell impact protectors that are part of the SSL meet all the requirements according to Table 1 (including the requirement for protection area coverage] the assessment of the abrasion resistance of the permanent hard shell protectors only, is not required.For areas of any Zone with rigid or semi-rigid external reinforcements that are attached to the SSL as inserts or overlays, the reinforced areas are not subject to abrasion testing. For rigid or semi-rigid external reinforcements that are a part of the SSL, if it is not possible to attach the rigid or semi-rigid external reinforcements to the impact abrasion testing apparatus according to the standard procedure, they are not subject to abrasion testing,If it is not possible to perform the abrasion test using samples of the SSL (e.g. due to the incorporation of an impact protection material); testing of representative samples of the SSL material or materials,that cover the external surface of the impact protection material is permitted.BS EN 17092-4 pdf download.