BS EN 17423:2020 pdf free.Energy performance of buildings – Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient一General Principles, Module M1-7.
BS EN 17423 This document provides a transparent framework for reporting on the choices related to the procedure to determine primary energy factors (PEFs) and CO2 emission coefficients for energy delivered to and exported from the buildings as described in EN ISO 52000-1. This document specifies the choices to be made to calculate the PEF(s) and CO2 emission coefficients related to different energy carriers. PEFs and CO2 emission coefficients for exported energy can be different from those chosen for delivered energy.This document is primarily intended for supporting and complementing EN ISO 52000-1, as the latter requires values for the PEFs and CO2 emission coefficients to complete the EPB calculation. But it can also be used for other applications. NOTE The CO2 emission coefficients allow calculating greenhouse gas emissions. According to the choices made, the CO2 emission coefficients represent only CO2 emissions or also other greenhouse gases. Table 1 shows the position (marked by“X”) of this document within the modular structure as set out in EN ISO 52000-1. The modules represent EPB standards, although one EPB standard may cover more than one module and
one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 15316-4-5, Energy performance of buildings – Method for calculation of system energy requirements and system efficiencies – Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 EN ISO 7345, Thermal performance of buildings and building components – Physical quantities and definitions (ISO 7345) EN ISO 52000-1:2017, Energy performance of buildings – Overarching EPB assessment – Part 1: General framework and procedures (ISO 52000-1:2017) BS EN 17423 pdf downlaod.