BS EN 934-6:2019 pdf free

05-17 comment

BS EN 934-6:2019 pdf free.Admixtures for concrete, mortar and grout.Sampling, assessment and verification of the constancy of performance.
BS EN 934-6 The sample shall be composed of sub-samples from 6 packages (bags) or if the total number of packages (bags) is less than 6, from all packages (bags). The sub-samples are to be taken from packages (bags) distributed at random throughout the consignment. One of the following procedures shall be applied: a} where the packages contain up to 500 g, take all the contents of each package; b) where the packages contain more than 500 g, use one of the following methods: 1) insert a sampling tube, which takes a core not less than 25 mm in diameter, into the packages so that it takes a core of the material from substantially the entire length of the package; 2] empty one of the packages to be sampled on to a clean dry surface and mix the material. Take at least three portions of not less than 125 g each from different parts of the heap. The method given in 1) is the preferred method, but if a sampling tube is not available, the method given in 2) shall be used. Repeat the procedure with each of the other packages to be sampled and thoroughly mix the subsamples obtained to form one bulk sample. If the bulk sample exceeds 3 kg, it shall be reduced to 3 kg, either by coning and quartering or by use of a sample splitter. Divide the sample into three equal parts and place each part in a clean, air tight, labelled container. At least one container holding 1 kg shall be kept for future reference. Store container(s) in a place that is protected from moisture, heat and light for one year or until the use-by date, whichever is the shorter period.The sample shall be composed of sub-samples taken from 6 containers or if the total number of containers is less than 6 from all containers. The sub-samples are to be taken from containers distributed at random throughout the consignment. Agitate the admixtures in the containers to disperse all lightly settled material. Disregard all deposits which are not readily brought into suspension by such agitation.BS EN 934-6 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information