BS ISO 24018:2020 pdf free

05-22 comment

BS ISO 24018:2020 pdf free.Jewellery and precious metals -Specifications for 1 kilogram gold bar.
Bars should have flat and smooth surfaces (a small shrinkage on the top surface is acceptable), and be free from cavities, holes, and significant layering. Edges shall not be sharp and pose a handling hazard. There is no specification for the internal quality, but the presence of gas bubbles can lead to bar rejection based on abnormal results of ultrasonic or electrical conductivity testing. All markings shall be only on the top surface. Markings shall be made using pressure stamping, dot matrix or laser markings [or a combination of those techniques). Markings shall be persistent and not alterable during handling and storage. The following minimum information shall be marked in an unambiguous way:  a) name or logo of the manufacturer, and/or brand mark; b) “gold” or “Au” to indicate the nature of the metal; c) mass in kilogram or gram, including the weighing unit, with up to 4 significant figures; EXAMPLE “1 kg”,“1,000 kg”,“1 000 g”. d) fineness in per thousand (%0) or percent (%), with or without the unit, with 3 or 4 significant figures; EXAMPLE “999,9 %o”,“99,90 %”,“995″. e) unique serial number; The following information may also be added:  a) assay mark; b) manufacturing year; c) only for bars in accordance with“999,9 %o ISO 24018”list of impurities, the reference “ISO 24018”; d) country of origin. The bar may bear on any side a security feature to guarantee its integrity and prevent counterfeiting. If this feature adds mass to the bar, this shall be disclosed in the certificate of analysis. Presence of a security feature shall not compromise the physical specification as per 4.3. A certificate of analysis shall accompany each bar, with at least the following information:  a) name or logo of the manufacturer; b) “gold” or “Au”to indicate the nature of the metal;It is recommended to pack 25 bars of 1 kg bars in one case. During transportation and storage, the bars shall not be damaged or contaminated. BS ISO 24018 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information