AS NZS 60335.1:2020 pdf free.Household and similar electrical appliances一Safety Part 1: General requirements (IEC 60335-1 Ed 5.2, MOD).
For appliance outlets and socket outlets accessible to the user
— that are incorporated in appliances connected to the supply mains; and
— that operate at rated voltage;
the appliance shall be marked with their maximum outlet load in watts.
Replace the requirement with the following variation:
Instructions and other text required by this standard shall be written in English.
After the last paragraph of the requirement insert the following variation:
The marking of the maximum outlet load shall be close to the appliance outlet or socket outlet.
After the last paragraph of the test specification insert the following variation:
Appliance outlets and socket outlets accessible to the user
— that are incorporated in appliances connected to the supply mains; and
— that operate at rated voltage;
are not loaded during the test, however their contribution to the power input is
considered to be the marked outlet load per appliance outlet or socket-outlet. After the first paragraph of the test specification insert the following variation:
Appliance outlets and socket outlets accessible to the user are loaded with a resistive load that gives the marked outlet load in watts.
After the first paragraph of the test specification insert the following variation:
The pins of plug connectors inserted into appliance outlets accessible to the user and plugs inserted into socket outlets accessible to the user shall have a temperature rise not exceeding 45 K.
After the seventh paragraph of the test specification insert the following variation:
During and after the tests the no-load output voltage of an accessible safety extra-low voltage outlet or connector or Universal Serial Bus (USB) outlet shall not have increased by more than 3 V or 10% of its no-load output voltage in normal use, whichever is higher.
After the first paragraph of the requirement insert the following variation:
For stationary appliances permanently connected to the fixed wiring, compliance with this requirement is considered to be met if the instruction concerning disconnection incorporated in the fixed wiring is in accordance with AS/NZS 3000.AS NZS 60335.1 pdf download.