AS pdf free download - Page 12 of 51

AS ISO 22915.1:2018 pdf free

AS ISO 22915.1:2018 pdf free.Industrial trucks—Verification of stability Part 1: General. 4 Stability tests for trucks 4.1 Test procedure Truck stability shall be verified by means of one of the procedures described below. The truck is considered stable if it passes all tests without tip-over or meets the requirements by calculation. When comparing calculated and test values, the test values...

09-07

Download

AS 4688.1:2018 pdf free – Safety and general requirements

AS 4688.1:2018 pdf free.Furniture—Fixed height chairs Part 1: Safety and general requirements. 5.2 Corners and edges The following requirements apply: (a) There shall be no sharp edges accessible to the user. (b) The ends of tubular components shall be capped or otherwise closed and finished smoothly. (c) All contact points with the floor shall be designed to militate against scratching....

09-07

Download

AS 1141.54:2018 pdf free – Foreign material in crushed recycled concrete for use in pavements

AS 1141.54:2018 pdf free.Methods for sampling and testing aggregates Method 54: Foreign material in crushed recycled concrete for use in pavements. 4 TYPES OF FOREIGN MATERIAL Foreign material is categorized as follows: (a) Type I or high density material such as asphalt, breccia, brick, ceramics glass, metal, sandstone, shale or slag (not blast furnace slag). (b) Type II or lowdensity...

09-07

Download

AS 1670.3:2018 pdf free – Part 3: Fire alarm monitoring

AS 1670.3:2018 pdf free.Fire detection, warning, control and intercom systems- -System design, installation and commissioning Part 3: Fire alarm monitoring. 3.1 GENERAL Equipment shall be installed in locations that will not prejudice its performance and reliability. Access for servicing all equipment shall be provided. Where special installation arrangements are required. the recommendations in the equipment documentation for that application should...

09-07

Download

AS 62053.24:2018 pdf free

AS 62053.24:2018 pdf free.Electricity metering equipment (ac)- Particular requirements Part 24: Static meters for reactive energy at fundamental frequency (classes 0.5S, 1 S and 1). 7.3 Influence of short-time overcurrents Short-time overcurrents shall not damage the meter. The meter shall perform correctly when back to its initial working condition and the variation of error shall not exceed the values shown...

09-07

Download

AS NZS 1680.4:2017 Interior and workplace lighting Part 4: Maintenance of electric lighting systems

AS NZS 1680.4:2017 pdf free.Interior and workplace lighting Part 4: Maintenance of electric lighting systems. 2.1 GENERAL All lighting schemes within a building will deteriorate progressively from the time they are installed. The losses are due to the accumulation of dust and dirt on all exposed surfaces of lamps, luminaires and room surfaces—reducing the transparency or reflecting power—and to the...

09-07

Download

AS 1603.11:2018

AS 1603.11:2018 pdf free.Automatic fire detection and alarm systems Part 11: Visual warning devices. 2.3 Luminance requirements for LED matrix, fixed message type VWD 2.3.1 Mean luminance The mean luminance for LED matrix VWD shall be not less than 180 cd/rn2. 2.3.2 Uniformity The ratio of maximum luminance to minimum luminance across the VWD shall be not less than 100:1...

09-07

Download

AS NZS 2980:2018 pdf free – Qualification of welders for fusion welding of steels

AS NZS 2980:2018 pdf free.Qualification of welders for fusion welding of steels—Additional requirements for Australia and New Zealand. 2 APPLICATION This Standard shall be read and applied in conjunction with the requirements of AS/NZS ISO 9606.1. The requirements of AS/NZS ISO 9606.1 apply other than where requirements within the normative Appendices of this Standard specifically indicate otherwise. The qualification tests...

09-07

Download

AS NZS 4641:2018 pdf free – Electrical equipment for detection of oxygen and other gases and vapours at toxic levels

AS NZS 4641:2018 pdf free.Electrical equipment for detection of oxygen and other gases and vapours at toxic levels- General requirements and test methods. 1.3 DEFINITIONS For the purpose of this Standard the definitions below apply. NOTE: For other definitions, AS/NZS 60079.0 and AS/NZS 60079.29.1 may be taken for guidance. 1.3.1 Gas properties 1.3.1.1 Ambient temperature Temperature of the normal atmosphere...

09-07

Download

AS 22915.20:2018 pdf free

AS 22915.20:2018 pdf free.Industrial trucks—Verification of stability Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization (ISO 22915- 20:2008, MOD). 4.2.2 Reach and straddle trucks The position of the truck on the tilt table shall be in accordance with test 3 of ISO 22915-3. 4.2.3 Pallet stackers The position of the...

09-07

Download