AS pdf free download - Page 13 of 51

AS 1289.6.4.1:2016 pdf free – Methods of testing soils for engineering purposes

AS 1289.6.4.1:2016 pdf free.Methods of testing soils for engineering purposes Method 6.4.1: Soil strength and consolidation tests—Determination of compressive strength of a soil—Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure. 4 PREPARATION OF SPECIMENS Procedures for the preparation of test specimens vary considerably in detail but the aim is to produce specimens...

09-06

Download

AS ISO 20400:2018 pdf free – Sustainable procurement- Guidance

AS ISO 20400:2018 pdf free.Sustainable procurement- Guidance. 4 Understanding the fundamentals 4.1 Concept of sustainable procurement Sustainable procurement is procurement that has the most positive environmental, social and economic impacts possible across the entire life cycle and that strives to minimize adverse impacts. Sustainable procurement is a powerful instrument when an organization considers sustainability requirements and its own contribution to...

09-06

Download

AS 7240.2:2018 pdf free – Fire detection control and indicating equipment

AS 7240.2:2018 pdf free.Fire Detection and Alarm Systems Part 2: Fire detection control and indicating equipment (ISO 7240-2:201 7, MOD). 4.4.5 Other indications during the fire alarm condition 4.4.5.1 If faults, disablements or tests are indicated by means of separate light-emitting indicators, and such indications are suppressed in the fire alarm condition, it shall be possible to reveal these by...

09-06

Download

AS NZS 3580.2.2:2016 pdf free – Preparation of reference test atmospheres

AS NZS 3580.2.2:2016 pdf free.Methods for sampling and analysis of ambient air Method 2.2: Preparation of reference test atmospheres- Compressed gas method. 6.2 Certified Reference %Iaterial (CRN’i) 6.2.1 General The CRM shall not contain any foreign component(s) that would invalidate the reference test atmosphere, e.g. oil in a mixture of methane in air to be used for the calibration of...

09-06

Download

AS 3566.2:2002 pdf free

AS 3566.2:2002 pdf free.Self-drilling screws for the building and construction industries Part 2: Corrosion resistance requirements. 5 REQUIREMENTS FOR CORROSION RESISTANCE 5.1 Class 1 Class I corrosion resistant screws shall comply with one of the following requirements: (a) Accelerated testing When Class 1 corrosion resistant self-drilling screws are prepared in accordance with Appendix A and tested in a neutral salt...

09-06

Download

SAE AS 5782A:2015 pdf free

SAE AS 5782A:2015 pdf free.Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, For Use in AS4716 Glands. 3. TECHNICAL REQUIREMENTS 3.1 Metric Equivalents Dimensions and properties in inch/pound/Fahrenheit units are primary; dimensions and properties in SI units are shown as the approximate equivalents of the primary units and are presented only for information. 3.2 Materials and Applications 3.2.1...

09-06

Download

AS NZS ISO 11990:2002 pdf free – Determination of laser resistance of tracheal tube shafts

AS NZS ISO 11990:2002 pdf free.Optics and optical instruments—Lasers and laser-related equipment—Determination of laser resistance of tracheal tube shafts. 5.2 A large number and range of variables are involved in laser ignition of a tracheal tube. A change in one variable may affect the outcome of the test. Caution should be observed, since the direct applicability of the results of...

09-06

Download

AS 4940:2002 pdf free

AS 4940:2002 pdf free.User-applied identification labels for use on fluid bags, syringes and drug administration lines. 3 GENERAL R EQUIREMENTS The label for fluid bags, syringes and the associated administration lines shall conform to the colour specified in Table 1 for the target tissue. The layout for labels on administration lines shall be as specified in Clause 4 and the...

09-06

Download

AS 2163:2002 pdf free

AS 2163:2002 pdf free.Laboratory glassware—Measuring cylinders. 8 GRADUATION AND NUMBERING 8.1 Graduation lines The graduation lines shall be clean, permanent lines of uniform thickness not exceeding 0.15 times the linear separation of the adjacent graduation lines and shall lie in planes at right-angles to the longitudinal axis of the measuring cylinder. 8.2 Spacing of graduation lines There shall be no...

09-06

Download

AS 3822:2002 pdf free – Test methods for bare overhead conductors

AS 3822:2002 pdf free.Test methods for bare overhead conductors. 4 PREPARATION OF A SAMPLE FOR TENSILE LOADING OF A WHOLE CONDUCTOR Preparation of a conductor test piece is critical to the accuracy and validity of the test results. Test pieces shall be prepared with due consideration to the prevention of conductor rotation and loosening of wires and to the minimizing...

09-06

Download