AS NZS 1214:2016 pdf download.Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) (ISO 10684:2004, MOD). 5.6 Spinning and quenching Parts shall be spun immediately following removal from the galvanizing bath and quenched in water or air cooled depending on size consideration. 5.7 Special requirements for nuts Nut threads and other internal threads shall be tapped after hot...
AS NZS 3002:2002 pdf free
AS NZS 3002:2002 pdf free.Electrical installations- Shows and carnivals. 1.4.4 Connection facility Any point within a permanent site low-voltage electrical installation supplying or intended to supply electrical power at low-voltage to any part of a temporary site low-voltage electrical installation. Typically a socket-outlet or set of terminals or links. (Refer also to Appendix B). 1.4.5 Detachable connection The electrical connection...
AS 60335.2.80:2016 pdf free
AS 60335.2.80:2016 pdf free.Household and similar electrical appliances—Safety Part 2.80: Particular requirements for fans (IEC 60335-2-80 Ed 3, MOD). 7.12,1 Addition: The instructions for ceiling fans shall include the substance of the following: — the fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the...
AS NZS 60079.29.3:2016 pdf free
AS NZS 60079.29.3:2016 pdf free.Explosive atmospheres Part 29.3: Gas detectors—Guidance on functional safety of fixed gas detection systems. 5.2.6 Poisoning and adverse chemical reaction Particular sensor technologies suffer from common cause failures; airborne substances can inhibit or poison certain sensor technologies (e.g. catalytic sensors) whereas electrochemical sensors can suffer from adverse chemical reactions. Sensors using such technologies have a dangerous...
AS NZS 60335.2.79:2002 pdf free
AS NZS 60335.2.79:2002 pdf free.Household and similar electrical appliances- Safety Part 2.97: Particular requirements for drives for shutters, awnings, blinds and similar equipment. 20.101 Rolling driven parts shall be prevented from unrolling in a hazardous manner. Compliance is checked by the following test, which is carried out with the drive disconnected from the supply mains. The drive is loaded with...
AS NZS 45001:2018 pdf free – Occupational health and safety management systems- Requirements with guidance for use
AS NZS 45001:2018 pdf free.Occupational health and safety management systems- Requirements with guidance for use. 4 Context of the organization 4.1 Understanding the organization and its context The organization shall determine external and internal issues that are relevant to its purpose and that affect its ability to achieve the intended outcome(s) of its OH&S management system. 4.2 Understanding the needs...
AS NZS 4130:2018 pdf free
AS NZS 4130:2018 pdf free.Polyethylene (PE) pipes for pressure applications. 3 I)F1’IXITIONS For the purpose of this Standard. the defiiihions given in AS NZS 3500.0. AS’NZS 41 3 1 and those below apply. 3.1 Brittle failure The type of failure of the material in pipe form during pressure testing, where the pipe exhibits no plastic delornialion visible to the naked...
AS 7240.4:2018 pdf free
AS 7240.4:2018 pdf free.Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2017, MOD). 5.3 Power sources 5.3.1 General 5.3.1.1 There shall be at least two power sources for the power supply of the FDAS: the main power source and the standby power source. 5.3.1.2 Each power source, on its own, shall be capable of meeting the PSE...
AS NZS 60598.2.5:2002 pdf free
AS NZS 60598.2.5:2002 pdf free.Luminaires Part 2.5: Particular requirements- Floodlights. 5.6.1 Floodlights for use outdoors shall have protection against the ingress of moisture at least equivalent to IPX3. 5.6.2 Lampholder brackets and lamp supports where used shall withstand normal usage throughout the life of the floodlight. They shall accept and retain lamps which are within the dimensional tolerances stated in...
AS 22915.12:2018 pdf free
AS 22915.12:2018 pdf free.Industrial trucks—Verification of stability Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer (ISO 22915- 12:2015, MOD). 3.1 industrial variable-reach truck handling freight container counterbalanced lift truck with an articulating boom, telescopic or not, non-slewing, as defined in ISO 5053:1987, 4.13.2.2.2, used especially for handling freight containers of 6 m...