admin, Author at ISO PDF Download

BS ISO 21195:2020 pdf free

BS ISO 21195:2020 pdf free.Ships and marine technology一Systems for the detection of persons while going overboard from ships (man overboard detection). The testing outlined in this document shall be conducted by a laboratory meeting the requirements of ISO 17025 or may be conducted by the manufacturer, provided the tests conducted by the manufacturer are approved by a laboratory meeting the...

06-01

Download

BS ISO 21102:2020 pdf free

BS ISO 21102:2020 pdf free.Adventure tourism一Leaders一 Personnel competence. The role of the leader shall include: a) using technical skills before or during the adventure tourism activity to decide about changes in the programme, if necessary, including but not limited to: undertaking analysis of the situation and cancelling or changing the activity due to hazards, risks and unforeseen situations; adopting contingency...

06-01

Download

BS ISO 3116:2019 pdf free

BS ISO 3116:2019 pdf free.Magnesium and magnesium alloys一Wrought magnesium and magnesium alloys. The designation for alloys shall consist of a prefix character "M", which represents magnesium, and not more than three capital letters representing the alloying elements specified in the greatest amount, arranged in order of decreasing percentages, or in alphabetical order if of equal percentages, followed by the respective...

05-22

Download

BS ISO 15500-19:2020 pdf free

BS ISO 15500-19:2020 pdf free.Road vehicles - Compressed natural gas (CNG) fuel system components. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)...

05-22

Download

BS ISO 15500-16:2020 pdf free

BS ISO 15500-16:2020 pdf free.Road vehicles—Compressed natural gas (CNG) fuel system components. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO...

05-22

Download

BS ISO 13821:2020 pdf free

BS ISO 13821:2020 pdf free.Corrugated fibreboard - Determination of edgewise crush resistance一Waxed edge method. The specimens, taken in accordance with ISO 186, shall permit the preparation of test pieces free from converting machine marks. If the test specimens are to be taken from corrugated shipping containers, they should be taken from areas away from score lines, joints, and closures. Specimens...

05-22

Download

BS ISO 6721-9:2019 pdf free

BS ISO 6721-9:2019 pdf free.Plastics一Determination of dynamic mechanical properties. Apply a sonic pulse to the specimen, and measure the arrival time tA (s) to an accuracy of士0,5 us.Repeat the measurements described in 9.3.1 and 9.3.2 for the same specimen at least three different separation distances between the transducers. In order to get good accuracy, the values of the distance should...

05-22

Download

BS ISO 5355:2019 pdf free

BS ISO 5355:2019 pdf free.Alpine ski-boots一Requirements and test methods. When the front bearing surface rests on a plane, a gauge 1 mm thick and 10 mm wide shall not enter the AB area at any point. See Figure 3.When the rear bearing surface rests on a plane, a gauge 1 mm thick and 10 mm wide shall not enter the...

05-22

Download

BS ISO 11525-1:2020 pdf free

BS ISO 11525-1:2020 pdf free.Rough-terrain trucks - Safe use requirements. This document shall be supplemented by good management practices, safety controls and application of sound principles of safety, training, inspection, maintenance, application selection and operation. All data available regarding the parameters of intended use and expected environment shall be considered. Those with direct control over the application and operation of...

05-22

Download

BS ISO 10968:2020 pdf free

BS ISO 10968:2020 pdf free.Earth-moving machinery一Operator's controls. The type, location and method of operation of typical primary controls shall be according to Annex A for base machine movements, according to Annex B for equipment movements, and according to Annex C for attachment movements. Specific requirements for graders are found in Annex D. Specific requirements for dozers are found in Annex...

05-22

Download