BS EN 13795-2:2019 pdf free.Surgical clothing and drapes -Requirements and test methods. infective agent microorganism that has been shown to cause wound infections or that might cause infection in a member of the surgical team or the patient. manufacturer natural or legal person with responsibility for the design, manufacture, packaging and labelling of a device before it is placed on...
BS EN 17069-1:2019 pdf free
BS EN 17069-1:2019 pdf free.Railway applications - Systems and procedures for change of track gauge. The design of the earthing system shall comply with EN 50153.The requirements regarding electrical resistance as set out in EN 13260 shall be applied. If necessary, specific electrical installation can be mounted. Vehicles fitted with variable- gauge systems shall fulfil EN 15273-1 and EN 15273-2. ...
BS EN 15276-1:2019 pdf free
BS EN 15276-1:2019 pdf free.Fixed firefighting systems - Condensed aerosol extinguishing systems. The thermal activation device shall be capable of operating at a rated temperature and arranged to initiate the aerosol-forming compound.Other methods of activation device. Methods capable to initiate the aerosol-forming compound, other than 4.4.2 and 4.4.3, shall be specified by the manufacturer.End plate and housing. The outer case...
BS EN 2584:2019 pdf free
BS EN 2584:2019 pdf free.Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the...
BS ISO 22915-21:2019 pdf free
BS ISO 22915-21:2019 pdf free.Industrial trucks一Verification of stability. normal operating conditions operating conditions corresponding to the truck travelling indoors on smooth, level floors of sufficient. strength such as those of concrete Note 1 to entry: This definition is different from the one given for normal operating conditions in ISO 22915-1.guided steering steering mode, either mechanical (e.g. guidance rails) or non-mechanical...
BS ISO 22479:2019 pdf free
BS ISO 22479:2019 pdf free.Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method). The source of sulfur dioxide should be a gas cylinder with a volume concentration of more than 99,9 %. It shall be fitted with appropriate regulating and measuring apparatus to ensure the supply of the correct volume of gas. The...
BS EN 2924:2019 pdf free
BS EN 2924:2019 pdf free.Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel,silver plated, left hand thread - Classification: 600 MPa (at ambient temperature) / 425 °C. 1 Scope This European standard specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, with left hand thread, in heat resisting steel, silver plated,...
BS ISO 21885:2019 pdf free
BS ISO 21885:2019 pdf free.Ships and marine technology一Testing specification for stairsteps using electrical resistance trace heating. The equipment shall be tested at the temperatures agreed upon between the manufacturer and the purchaser. The test temperature shall be observed after the test-specimen temperature is stabilized according to 5.3.2.2. The temperature of the wind delivered to the test specimen shall be within...
BS ISO 9838:2019 pdf free
BS ISO 9838:2019 pdf free.Alpine and touring ski-bindings- Test soles for ski-binding tests. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies....
BS ISO 5647:2019 pdf free
BS ISO 5647:2019 pdf free.Paper and board- Determination of titanium dioxide content. titanium dioxide content of paper or board (expressed on an oven-dry basis), determined after ashing the sample and dissolving the ash by the method specified in this document. Titanium dioxide is determined by ashing the sample and dissolution of the ash in sulphuric acid and ammonium sulphate. Determination...