BS pdf free download - Page 23 of 117

BS ISO 6721-6:2019 pdf free

BS ISO 6721-6:2019 pdf free.Plastics - Determination of dynamic mechanical properties. Various shear test specimen assemblies can be used. A suitable design is shown in Figure 2. Here the metal end-pieces P are cylindrical, but any cross-sectional shape is suitable as long as the end-pieces can be clamped rigidly in the shear load stage. The dimensions of the end-pieces and...

06-03

Download

BS EN 14134:2019 pdf free

BS EN 14134:2019 pdf free.Ventilation for buildings - Performance measurement and checks for residential ventilation systems. Checks and measurements conditions are as follows: the mechanical ventilation system shall be switched on; the system settings shall remain unchanged during measurements; all external and internal doors, and windows shall be closed; all other ventilation provisions such as externally and internally mounted air...

06-03

Download

BS ISO 11003-1:2019 pdf free

BS ISO 11003-1:2019 pdf free.Adhesives - Determination of shear behaviour of structural adhesives. Torsion-testing machine, with a capacity of at least 300 N.m and preferably of 1 000 N.m. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1 %. The gripping heads shall...

06-03

Download

BS ISO 8100-1:2019 pdf free

BS ISO 8100-1:2019 pdf free.Lifts for the transport of persons and goods. Passenger and goods passenger lifts shall comply with the safety requirements and/or protective measures of the following clauses. In addition, the passenger and goods passenger lifts shall be designed according to the principles of ISO 12100 for hazards relevant but not significant that are not dealt with by...

06-03

Download

BS ISO 6474-2:2019 pdf free

BS ISO 6474-2:2019 pdf free.Implants for surgery一Ceramic materials . Specimens shall be produced in a similar way to the regular production of implants. The same feedstock and comparable shaping technology (e. g. axial pressing, isostatic pressing), high-temperature process (e. g. sintering, hot isostatic pressing) and hard machining

06-03

Download

BS EN 17038-1:2019 pdf free

BS EN 17038-1:2019 pdf free.Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units. In order to assess the efficiency of pump units, their actual electrical power input P1, avg is compared with a reference value called P1, ref. It is a nominal power input of a fictitious pump unit running at nominal 100...

06-03

Download

BS EN 16603-33-11:2019 pdf free

BS EN 16603-33-11:2019 pdf free.Space engineering - Explosive subsystems and devices. The following normative documents contain provisions which, through reference in this text, constitute provisions of this ECSS Standard. For dated references, subsequent amendments to, or revision of any of these publications, do not apply. However, parties to agreements based on this ECSS Standard are encouraged to investigate the possibility...

06-03

Download

BS EN 13795-1:2019 pdf free

BS EN 13795-1:2019 pdf free.Surgical clothing and drapes -Requirements and test methods. manufacturer natural or legal person with responsibility for the design, manufacture, packaging and labelling of a device before it is placed on the market under his own name, regardless of whether these operations are carried out by that person himself or on his behalf by a third party...

06-03

Download

BS EN 6098:2019 pdf free

BS EN 6098:2019 pdf free.Aerospace series - Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only...

06-03

Download

BS EN 3645-005:2019 pdf free

BS EN 3645-005:2019 pdf free.Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous . The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references,...

06-03

Download