BS EN 16293:2020 pdf free.Packaging - Glass Packaging - Deep BVS finishes for still wines. BS EN 16293 This document specifes dimensions of a series of deep screw finishes for the closure of wines with a COz content below 1,2 g per litre.NOTE Carbonation≥1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and...
BS EN 16867:2020 pdf free
BS EN 16867:2020 pdf free.Building hardware - Mechatronic door furniture - Requirements and test methods. BS EN 16867 This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).The MDF, according to...
BS EN 16905-2:2020 pdf free
BS EN 16905-2:2020 pdf free.Gas-fired endothermic engine driven heat pumps. BS EN 16905-2 This European Standard applies to GEHP appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery.The GEHP appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard....
BS EN 16307-1:2020 pdf free
BS EN 16307-1:2020 pdf free.Industrial trucks - Safety requirements and verification,Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variabl-ereach trucks and burden-carrier trucks. BS EN 16307-1 The requirements of EN ISO 3691 -1:2015, 4.7.7.1 shall apply with the following addition:Where fixed and/or removable guard systems are needed, the requirements of EN ISO 14120:2015 shall be met.When a fixed...
BS EN 16524:2020 pdf free
BS EN 16524:2020 pdf free.Mechanical products - Methodology for reduction of environmental impacts in product design and development. BS EN 16524 This document describes a methodology for reducing the overall environmental impact through product design and development that is tailored to mechanical products as defined in 3.1.This methodology is particularly well suited to the redesign of an existing product; it...
BS EN 14628-1:2020 pdf free
BS EN 14628-1:2020 pdf free.Ductile iron pipes, fittings and accessories -Requirements and test methods. BS EN 14628-1 The impact energy to be applied shall be 5 J per millimetre of minimum coating thickness for DN > 200.This figure shall be reduced by 15 % for DN≤200 in order to account for their increased radius of curvature.The minimum distance between two...
BS EN 13260:2020 pdf free
BS EN 13260:2020 pdf free.Railway applications一Wheelsets and bogies - Wheelsets一Product requirements. BS EN 13260 Before assembly, the various components of the wheelset must fulfil the geometric requirements of the specific documents that define them. In particular, the axle and wheels must be in the "ready to assemble"state defined in EN 13262 for wheels and EN 13261 for axles.The components of...
BS EN 12953-5:2020 pdf free
BS EN 12953-5:2020 pdf free.Shell boilers,Inspection during construction, documentation and marking of pressure parts of the boiler. BS EN 12953-5 The manufacturer shall be responsible for ensuring the boiler conforms to the requirements of this European Standard. Conformity shall be confirmed by the completion of a series of inspection activities as given in Table 1.Depending upon the conformity assessment module...
BS EN IEC 63093-1:2020 pdf free
BS EN IEC 63093-1:2020 pdf free.Ferrite cores — Guidelines on dimensions and the limits of surface irregularities,General specification. BS EN IEC 63093-1 This part of IEC 63093 specifies the dimensions and allowable limits of surface irregularities of ferrite cores. It is intended that this document includes ferrite cores which are widely used and referenced in industry, either because they are...
BS EN ISO 7787-2:2020 pdf free
BS EN ISO 7787-2:2020 pdf free.Dentistry - Laboratory cutters.Carbide laboratory cutters. BS EN ISO 7787-2 This document specifies dimensional and other requirements for the 11 most commonly used carbide cutters which are predominantly used in the dental laboratory. NOTE These cutters are also used in podiatry.The following documents are referred to in the text in such a way that some...