ISO PDF Download

AS NZS 62841.3.14:2018 pdf free – Particular requirements for transportable drain cleaners

AS NZS 62841.3.14:2018 pdf free.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety, Part 3.14: Particular requirements for transportable drain cleaners. 8.14.1.1 Addition: Item 2) b) is not applicable. 8.14.1.101 Safety instructions for drain cleaners NOTE 1 In the below instructions, on discretion of the manufacturer the term “drain” is replaced with the term “pipe”. a) Before...

09-07

Download

AS NZS 62841.3.13:2018 pdf free – Particular requirements for transportable drills

AS NZS 62841.3.13:2018 pdf free.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery—Safety Part 3.13: Particular requirements for transportable drills. 8.14.1.101 Safety instructions for transportable drills Drill safety warnings a) The drill must be secured. A drill that is not properly secured may move or tip over and may result in personal injury. b) The workpiece must be...

09-07

Download

AS NZS 60598.2.21:2018 pdf free – Particular requirements—Rope lights

AS NZS 60598.2.21:2018 pdf free.Luminaires Part 2.21: Particular requirements—Rope lights (IEC 60598-2-21:2014, MOD). 21.7 Construction 21.7.1 General The provisions of Section 4 of IEC 60598-1 apply together with the requirements of 21.7.2 to 21.7.5. 21.7.2 Terminal blocks Clause 4.6 of Section 4 of IEC 60598-1 referring to terminal block does not apply. 21.7.3 Terminals and supply connections Clause 4.7 of...

09-07

Download

AS NZS 1055:2018 pdf free

AS NZS 1055:2018 pdf free.Acoustics—Description and measurement of environmental noise. 5.2 Measurement of time average A-weighted sound pressure level (Lcq.i) The instrumentation to measure LACq.T shall include but is not limited to— (a) integrating-averaging sound level meter set to frequency-weighting ‘A’; or (b) data analyser for sampling the running value of A-weighted sound pressure level. 5.3 Measurement of percent exceedance...

09-07

Download

AS 7240.7:2018 pdf free

AS 7240.7:2018 pdf free.Fire detection and alarm systems Part 7: Point type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2018, MOD). 4.3 Individual alarm indication Each detector shall be provided with an integral red visual indicator by which the individual detector releasing an alarm can be identified, until the alarm condition is reset. Where other conditions of...

09-07

Download

AS 4024.3201:2018 pdf free – Safety of machinery

AS 4024.3201:2018 pdf free.Safety of machinery Part 3201: Plastics and rubber machines—Blow moulding machines—Safety requirements. 5.1.5.2 Electro-sensitive protecting equipment (ESPE) ESPE may be used if the ejection of hot plastics is prevented by design of the machine. The ESPE shall be in accordance with EN 61496-1:1997 or EN 61496-3:2001 and be positioned according to EN 999:1998. The ESPE shall become...

09-07

Download

AS IEC 60060.1:2018 pdf free High-voltage test techniques Part 1: General definitions and test requirements

AS IEC 60060.1:2018 pdf free.High-voltage test techniques Part 1: General definitions and test requirements. 4 General requirements 4.1 General requirements for test procedures The test procedures applicable to particular types of test objects, for example, the test voltage, the polarity to be used, the preferred order if both polarities are to be used, the number of applications and the interval...

09-07

Download

AS 4024.3403:2018 pdf download – Safety of packaging machines

AS 4024.3403:2018 pdf download.Safety of machinery Part 3403: Safety of packaging machines- Form, fil and seal machines. 4.1.4 Pneumatic and hydraulic equipment Pneumatic and hydraulic equipment presents crushing, shearing, ejection of parts, explosion and injection of fluids hazards. In addition hydraulic oil and pneumatic lubricating oil are a potential fire hazard and can contaminate agri-foodstuffs. 4.1.5 Electrical equipment Electrical equipment...

09-07

Download

AS NZS 1605.4:2018 pdf free – Analysis methods for determination of preservative solution concentration

AS NZS 1605.4:2018 pdf free.Methods for sampling and analysing timber preservatives and preservative- treated timber Part 4: Analysis methods for determination of preservative solution concentration. 2.1 PRINCIPLE Copper and arsenic are determined by atomic-absorption spectrophotornetry. Hexavalent chromium is determined by back-titration of excess iron added as ferrous ammoniurn sulphate. This method is applicable to CCA mix tank or working tank...

09-07

Download

AS 2753:2018 pdf free Adhesives—For bonding gypsum plaster linings to wood and metal framing members

AS 2753:2018 pdf free.Adhesives—For bonding gypsum plaster linings to wood and metal framing members. 3.5 Bond strength in shear 3.5.1 After 24 h and 14 days drying The bond strength in shear of the adhesive shall be determined in accordance with the method in Clause D.2 or Clause D.3 of Appendix D, as appropriate. Each assembly shall be — (a)...

09-07

Download