ISO PDF Download

BS ISO 22915-21:2019 pdf free

BS ISO 22915-21:2019 pdf free.Industrial trucks一Verification of stability. normal operating conditions operating conditions corresponding to the truck travelling indoors on smooth, level floors of sufficient. strength such as those of concrete Note 1 to entry: This definition is different from the one given for normal operating conditions in ISO 22915-1.guided steering steering mode, either mechanical (e.g. guidance rails) or non-mechanical...

06-04

Download

BS ISO 22479:2019 pdf free

BS ISO 22479:2019 pdf free.Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method). The source of sulfur dioxide should be a gas cylinder with a volume concentration of more than 99,9 %. It shall be fitted with appropriate regulating and measuring apparatus to ensure the supply of the correct volume of gas. The...

06-04

Download

BS EN 2924:2019 pdf free

BS EN 2924:2019 pdf free.Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel,silver plated, left hand thread - Classification: 600 MPa (at ambient temperature) / 425 °C. 1 Scope This European standard specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, with left hand thread, in heat resisting steel, silver plated,...

06-04

Download

BS ISO 21885:2019 pdf free

BS ISO 21885:2019 pdf free.Ships and marine technology一Testing specification for stairsteps using electrical resistance trace heating. The equipment shall be tested at the temperatures agreed upon between the manufacturer and the purchaser. The test temperature shall be observed after the test-specimen temperature is stabilized according to 5.3.2.2. The temperature of the wind delivered to the test specimen shall be within...

06-04

Download

BS ISO 9838:2019 pdf free

BS ISO 9838:2019 pdf free.Alpine and touring ski-bindings- Test soles for ski-binding tests. The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies....

06-04

Download

BS ISO 5647:2019 pdf free

BS ISO 5647:2019 pdf free.Paper and board- Determination of titanium dioxide content. titanium dioxide content of paper or board (expressed on an oven-dry basis), determined after ashing the sample and dissolving the ash by the method specified in this document. Titanium dioxide is determined by ashing the sample and dissolution of the ash in sulphuric acid and ammonium sulphate. Determination...

06-04

Download

BS ISO 20900:2019 pdf free

BS ISO 20900:2019 pdf free.Intelligent transport systems一Partially automated parking systems (PAPS)一Performance requirements and test procedures. The system searches for parking spaces/slots/garages. The search may be initiated by the driver. The system should inform the driver that it has identified one or more possible parking spaces/slots/ garages. The system may also be activated after the driver parks the car straight (e.g....

06-04

Download

BS ISO 20501:2019 pdf free

BS ISO 20501:2019 pdf free.Fine ceramics are produced, together with confidence bounds on these parameters. If necessary, the estimate of the mean strength can be computed. Finally, a graphical representation of the failure data along with a test report can be prepared. It should be noted that the confidence bounds are frequently widely spaced, which indicates that the results of...

06-04

Download

BS ISO 6489-5:2019 pdf free

BS ISO 6489-5:2019 pdf free.Agricultural vehicles一Mechanical connections between towed and towing vehicles. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any...

06-04

Download

BS ISO 5832-12:2019 pdf free

BS ISO 5832-12:2019 pdf free.Implants for surgery一Metallic materials. 1 Scope This document specifies the requirements for two wrought cobalt 28-chromium 6-molybdenum alloys used for surgical implants. The properties apply specifically to wrought bar, rod and wire. NOTE 1 The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this...

06-04

Download