ISO PDF Download

AS NZS 2980:2018 pdf free – Qualification of welders for fusion welding of steels

AS NZS 2980:2018 pdf free.Qualification of welders for fusion welding of steels—Additional requirements for Australia and New Zealand. 2 APPLICATION This Standard shall be read and applied in conjunction with the requirements of AS/NZS ISO 9606.1. The requirements of AS/NZS ISO 9606.1 apply other than where requirements within the normative Appendices of this Standard specifically indicate otherwise. The qualification tests...

09-07

Download

AS NZS 4641:2018 pdf free – Electrical equipment for detection of oxygen and other gases and vapours at toxic levels

AS NZS 4641:2018 pdf free.Electrical equipment for detection of oxygen and other gases and vapours at toxic levels- General requirements and test methods. 1.3 DEFINITIONS For the purpose of this Standard the definitions below apply. NOTE: For other definitions, AS/NZS 60079.0 and AS/NZS 60079.29.1 may be taken for guidance. 1.3.1 Gas properties 1.3.1.1 Ambient temperature Temperature of the normal atmosphere...

09-07

Download

AS 22915.20:2018 pdf free

AS 22915.20:2018 pdf free.Industrial trucks—Verification of stability Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization (ISO 22915- 20:2008, MOD). 4.2.2 Reach and straddle trucks The position of the truck on the tilt table shall be in accordance with test 3 of ISO 22915-3. 4.2.3 Pallet stackers The position of the...

09-07

Download

AS 1289.6.4.1:2016 pdf free – Methods of testing soils for engineering purposes

AS 1289.6.4.1:2016 pdf free.Methods of testing soils for engineering purposes Method 6.4.1: Soil strength and consolidation tests—Determination of compressive strength of a soil—Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure. 4 PREPARATION OF SPECIMENS Procedures for the preparation of test specimens vary considerably in detail but the aim is to produce specimens...

09-06

Download

AS ISO 20400:2018 pdf free – Sustainable procurement- Guidance

AS ISO 20400:2018 pdf free.Sustainable procurement- Guidance. 4 Understanding the fundamentals 4.1 Concept of sustainable procurement Sustainable procurement is procurement that has the most positive environmental, social and economic impacts possible across the entire life cycle and that strives to minimize adverse impacts. Sustainable procurement is a powerful instrument when an organization considers sustainability requirements and its own contribution to...

09-06

Download

AS 7240.2:2018 pdf free – Fire detection control and indicating equipment

AS 7240.2:2018 pdf free.Fire Detection and Alarm Systems Part 2: Fire detection control and indicating equipment (ISO 7240-2:201 7, MOD). 4.4.5 Other indications during the fire alarm condition 4.4.5.1 If faults, disablements or tests are indicated by means of separate light-emitting indicators, and such indications are suppressed in the fire alarm condition, it shall be possible to reveal these by...

09-06

Download

AS NZS 3580.2.2:2016 pdf free – Preparation of reference test atmospheres

AS NZS 3580.2.2:2016 pdf free.Methods for sampling and analysis of ambient air Method 2.2: Preparation of reference test atmospheres- Compressed gas method. 6.2 Certified Reference %Iaterial (CRN’i) 6.2.1 General The CRM shall not contain any foreign component(s) that would invalidate the reference test atmosphere, e.g. oil in a mixture of methane in air to be used for the calibration of...

09-06

Download

AS 3566.2:2002 pdf free

AS 3566.2:2002 pdf free.Self-drilling screws for the building and construction industries Part 2: Corrosion resistance requirements. 5 REQUIREMENTS FOR CORROSION RESISTANCE 5.1 Class 1 Class I corrosion resistant screws shall comply with one of the following requirements: (a) Accelerated testing When Class 1 corrosion resistant self-drilling screws are prepared in accordance with Appendix A and tested in a neutral salt...

09-06

Download

SAE AS 5782A:2015 pdf free

SAE AS 5782A:2015 pdf free.Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, For Use in AS4716 Glands. 3. TECHNICAL REQUIREMENTS 3.1 Metric Equivalents Dimensions and properties in inch/pound/Fahrenheit units are primary; dimensions and properties in SI units are shown as the approximate equivalents of the primary units and are presented only for information. 3.2 Materials and Applications 3.2.1...

09-06

Download

AS NZS ISO 11990:2002 pdf free – Determination of laser resistance of tracheal tube shafts

AS NZS ISO 11990:2002 pdf free.Optics and optical instruments—Lasers and laser-related equipment—Determination of laser resistance of tracheal tube shafts. 5.2 A large number and range of variables are involved in laser ignition of a tracheal tube. A change in one variable may affect the outcome of the test. Caution should be observed, since the direct applicability of the results of...

09-06

Download