ISO PDF Download

BS ISO 9523:2019 pdf free

BS ISO 9523:2019 pdf free.Touring ski-boots for adults一Interface with touring ski-bindings一Requirements and test methods. The sole dimensions in the toe and heel boot binding interface areas shall be symmetrical about the median plane within an admissible deviation of 1 mm. There shall be no protrusion of the sole beyond the shell for the whole perimeter of the whole boot sole...

05-22

Download

BS ISO 21406:2020 pdf free

BS ISO 21406:2020 pdf free.Tourism and related services一Yacht harbours一Essential requirements for luxury harbours. The luxury yacht harbour shall have access control effective 24 h a day, 7 days a week. Access controls such as key pads and swipe cards shall be accessible and within reach of persons with physical disabilities, and provide both audible and visual confirmation when access is...

05-22

Download

BS ISO 21322:2020 pdf free

BS ISO 21322:2020 pdf free.Cosmetics - Microbiology - Testing of impregnated or coated wipes and masks. The method determines the population of viable microorganisms by enumeration of colonies on a non-selective agar medium and by the presence or absence of specified microorganisms growth after enrichment. The method involves the following steps:selection of the test sample; selection of an appropriate method;...

05-22

Download

BS ISO 24497-1:2020 pdf free

BS ISO 24497-1:2020 pdf free.Non-destructive testing一Metal magnetic memory. Equipment and structures (IOs) should be inspected by MMM in in-service state (under load) as well as in the maintenance state (after removal of operating loads). If possible, the initial magnetic service state of the I0 should be determined.Surface dressing and preparation are not required. It is recommended to remove insulation to...

05-22

Download

BS ISO 24018:2020 pdf free

BS ISO 24018:2020 pdf free.Jewellery and precious metals -Specifications for 1 kilogram gold bar. Bars should have flat and smooth surfaces (a small shrinkage on the top surface is acceptable), and be free from cavities, holes, and significant layering. Edges shall not be sharp and pose a handling hazard. There is no specification for the internal quality, but the presence...

05-22

Download

BS ISO 23354:2020 pdf free

BS ISO 23354:2020 pdf free.Business requirements for end-to-end visibility of logistics flow. Data providers can share/obtain data to/from connected LISS directly and to/from other LISSS indirectly. Data users can obtain data from multi-LISSs directly or indirectly.The detailed network architecture requirements are specified in Clause 6.Visibility data interchange requirements between LISSS.Data interchange should be neutral, trusted and controlled. Event data should...

05-22

Download

BS ISO 22970:2019 pdf free

BS ISO 22970:2019 pdf free.Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap- shear strength test with additional stress by condensation test or cataplasm storage. It describes the adhesive strength testing of adhesives on coatings by determination of the tensile lapshear strength. This method yields...

05-22

Download

BS ISO 8820-13:2020 pdf free

BS ISO 8820-13:2020 pdf free.Road vehicles——Fuse-links. In addition to carrying out the test procedures in accordance with ISO 8820-1, the following criteria apply. Tests shall be performed following the test sequences in Table 2. The test fixtures for electrical tests shall be designed in accordance with Figure 1. Only one element at a time is energized. The connection resistance shall...

05-22

Download

BS ISO 8600-6:2020 pdf free

BS ISO 8600-6:2020 pdf free.Endoscopes——Medical endoscopes and endotherapy devices. Biopsy forceps endotherapy device (3.1.4), consists of a rigid or flexible metal coil or plastic tube whose distal end is equipped with a pair of cups (3.5.13) which is operated by a control handle (3.5.36) attached at the proximal end of the instrument, used through a compatible endoscope (3.1.3) introduced into...

05-22

Download

BS ISO 8178-1:2020 pdf free

BS ISO 8178-1:2020 pdf free.Reciprocating internal combustion engines -Exhaust emission measurement. The emission of gaseous and particulate components by the engine submitted for testing shall be measured by the methods described in Clauses 6 to 8. These clauses describe the engine and ambient related measurement systems (Clause 6), the analytical systems for the gaseous emissions (Clause 7) and the particulate...

05-22

Download