BS ISO 9043:2008 pdf free.Mopeds — Measurement method for moments of inertia. Introduction The stability of a moped is a very important element of its active safety. The moped/rider combination and the environment in which this combination is used form a unique closed-loop system. However, the evaluation of moped/rider combination stability is extremely complex because of interaction of the intrinsic...
BS 8507-1:2008 pdf free
BS 8507-1:2008 pdf free.Code Of Practice For Close Protection Services - Part1:Services Within The United Kingdom. BS 8507-1 gives recommendations for the management, staffing and operational accountability for the provision of all aspects of close protection services within the United Kingdom of Great Britain and Northern Ireland, and Crown Dependencies. Additionally,this code might be used by those who wish to...
ASTM D3451:2006 (R2017) pdf free
ASTM D3451:2006 (R2017) pdf free.Standard Guide for Testing Coating Powders and Powder Coatings. ASTM D3451 covers the determination of the acid material, which disassociates in distilled water, that is present in sulfur. The acidity is determined by an electrometric or visual titration. The values stated in SI units are to he regarded as the standard. The values given in parentheses...
BS 3412:1992 pdf free
BS 3412:1992 pdf free.Methods of specifying general purpose polyethylene materials for moulding and extrusion. This British Standard gives a method for specifying the composition and property requirements of ethylene homopolymers and ethylene copolymers having a maximum content of other 1-olefin monomers of less than 50 0% (m/m). In addition, those with a content of non-olefinic monomers with functional groups up...
BS 7558:1992 pdf free
BS 7558:1992 pdf free.Specification for gun cabinets.Here is the part of the introduction: BS 7558 specifies requirements for the construction and security of cabinets intended for the storage of firearms and ammunition when these are not in use. NOTE The titles of the publications referred to in this standard are listed on the inside back cover. 3 Security When tested...
BS 3691:1990 pdf free
BS 3691:1990 pdf free.Specification for E glass fibre rovings for reinforcement of polyester and epoxy resin systems. BS 3691 specifies requirements for E glass fibre rovings intended for the reinforcement of polyester and epoxy resin systems, including vinyl and bisphenyl polyesters. NOTE The titles of the publications referred to in this standard are listed on the inside back cover. 4...
BS 7423:1991 pdf free
BS 7423:1991 pdf free.Specification for safety requirements for children's travel cots of internal base length not less than 900 mm. BS 7423 specifies safety requirements for children’s travel cots of internal base length not less than 900 mm. It covers materials, dimensions and construction. NOTE 1 Guidance on t.he selection and use of materials is given in Appendix A. NOTE...
BS 6375-1:2004 pdf free
BS 6375-1:2004 pdf free.PERFORMANCE OF WINDOWS AND DOORS - PART 1: CLASSIFICATION OF WEATHERTIGHTNESS AND GUIDANCE ON SELECTION AND SPECIFICATION. BS 6375-1 specifies the exposure categories related to test pressure levels for air permeability, watertightness and wind resistance for external windows and doors. It is applicable to all types of vertical windows and doors, and includes windows in which the...
BS 5504-4:1990 pdf free
BS 5504-4:1990 pdf free.Wall hung WC pan - Part4:Specification for wall hung WC pans for use with 7.5 L maximum flush capacity cisterns. BS 5504-4 specifies material, quality, performance and functional dimensions (other than connecting dimensions) for wall hung washdown WC pans designed for use with independent or close-coupled cisterns complying with BS 7357 having a flush capacity of 7.5...
BS 5535:1978 pdf free
BS 5535:1978 pdf free.Specification for right angle and box angle plates. BS 5535 relates to angle plates ranging in size from 60 mm X 50 mm to 600 mm x 500 mm. Successive sizes are in a series in which the dimensions increase by about the same ratio throughout. Three grades, viz AA, A, and B, are provided according to...