ASTM D3184-11 pdf free.Standard Practice for Rubber - Evaluation of NR (Natural Rubber). ASTM D3184 covers the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of natural rubber (NR). 5. Sample Preparation 5.1 For tests intended for referee purposes obtain and prepare the samples in accordance with Test Methods D1485. 6. Mixing Procedures...
ASTM D3192-09 pdf free
ASTM D3192-09 pdf free.Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber). These test methods cover the standard materials, test formulation, mixing procedure, and test methods for the evaluation and production control of carbon blacks in natural rubber (NR). 5. Sampling and Sample Preparation 5.1 Samples shall be taken in accordance with Practice D 1799 or Practice D...
ASTM D395-18 pdf free
ASTM D395-18 pdf free. Standard Test Methods for Rubber Property—Compression Set. These test methods cover the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air or liquid media. They are applicable particularly to the rubber used in machinery mountings, vibration dampers, and seals. 3. Summar of Test methods 3....
ASTM E2300-09(2017) pdf free
ASTM E2300-09(2017) pdf free.Standard Specification for Highway Traffic Monitoring Devices. ASTM E2300 describes the recommended procedure for identifying the performance and operating requirements to be included in a purchase order for Traffic Monitoring Devices. As such, the specification can be referenced by the user and seller when determining compliance with each specified requirement. It is the intent of this specification...
ASTM E2532-09(2017) pdf free
ASTM E2532-09(2017) pdf free.Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices. The two test methods contained in this standard define acceptance tests for evaluating the performance of a Traffic Monitoring Device (TMD) according to the functions it performs, the data it provides, the required accuracy of the data, and the conditions under which the device operates. Acceptance...
ASTM E1115-11(2017) pdf free
ASTM E1115-11(2017) pdf free. Standard Test Method for Evaluation of Surgical Hand Scrub Formulations. ASTM E1115 is designed to measure the reduction of microbial flora on the skin. It is intended for determining both immediate and persistent (continuing antimicrobial effect) microbial reductions, after single or repetitive treatments, or both. It may also be used to measure cumulative antimicrobial activity after...
ASTM D6124-06(2017) pdf free
ASTM D6124-06(2017) pdf free.Standard Test Method for Residual Powder on Medical Gloves. ASTM D6124 covers the determination of average powder or filter-retained mass found on a sample of medical gloves as described in the introduction. This test method is designed to determine the amount of residual powder and non-powder solids found on medical gloves. ASTM D6124 is suitable and designed...
ASTM F434-93(2017) pdf free
ASTM F434-93(2017) pdf free.Standard Test Method for Blow-Out Testing of Preformed Gaskets. ASTM F434 covers the determination of the resistance against blow-out of preformed gaskets. The test is conducted under ambient conditions and should be used for comparison purposes only to select suitable designs and constructions for specific applications. 5. Test Spedmen 5.1 The specimen shall be a 102 mm...
BS 202000:2020 free download
BS 202000:2020.Standardization management system – Specification. BS 202000 specifies requirements for an SMS in order to identify measurable criteria for effective SM and instil organizational cultures and behaviours to deliver vendor and supplier confidence with regards to standardization. 3 Terms and definitions For the purposes of this British Standard, the following terms and definitions apply. 3.1 assurance aspect of corporate...
BS 5752-10:1986 pdf free
BS 5752-10:1986 Methods Of Test For Coffee And Coffee Products - Part10:Instant Coffee: Size Analysis. 1 Scope and field of application BS 5752-10 specifies a method for the determination of the particle size (screen) analysis of instant coffee, by manual or mechanical sieving, using test sieves. 2 References ISO 2591, Test sieving. ISO 33 10-1, Test sieves — Technical requirements...