AS 5100.4:2017 pdf free.Bridge Design - Part4:Bearings And Deck Joints. This Standard sets out minimum design and performance requirements for bearings and deck joints for the articulation and accommodation of movements of bridge structures. It applies to elastomeric, pot, spherical and mechanical bearings and deck joints, all of which are locations where rotation or translation, or both, can take place....
AS 1657:2018 pdf free
AS 1657:2018 pdf free.Fixed platforms, walkways, stairways and ladders - Design, construction and installation. This Standard sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel. This Standard also applies to the following: (a)Movable platforms that...
AS 1074-1989 pdf free
AS 1074-1989 pdf free.Fixed Platforms, Walkways, Stairways And Ladders - Design, Construction And Installation. This Standard sets out requirements for the design. construction, and installation of fixed platforms, walkways, stairways, and ladders which are intended to provide means of safe access to and safe working at places normally used by operating, inSpection, maintenance, and servicing personnel. The Standard does not...
AS 4100-1998 pdf free
AS 4100-1998 pdf free.Steel Structures.Download AS 4100 pdf . 1.1.1 Scope This Standard sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel. This Standard is intended to apply also to roadway, railway, and pedestrian bridges....
AS 4882-2003 pdf free
AS 4882-2003 pdf free.Shielding gases for welding.Download AS 4882 pdf. This Standard specifies the requirements for shielding gases and the tolerances on the nominal value of constituent gases in mixtures. This Standard applies, but is not limited, to the following processes: (a)Gas tungsten arc welding(GTAW) (b)Gas metal arc welding(GMAW) (c) Flux cored are welding(FCAW) (d)Plasma arc welding(PAW) NOTES: For further...
AS/NZS 1957:1998 pdf free
AS/NZS 1957:1998 pdf free.Textiles - Care labelling.Download AS/NZS 1927 pdf. 1.1 SCOPE This Standard sets out words, phrases and symbols to be used for giving care instructions for clothing, household textiles, apparel, furnishings, upholstered furniture and bedding, piece goods and yarns, leather apparel and upholstery. It also specifies methods by which these goods may be labelled or where appropriate,the instructions...
AS 1288-2006 pdf free
AS 1288-2006 pdf free.Glass in buildings - Selection and installation. This Standard sets out procedures for the selection and installation of glass in buildings subject to wind loading, human impact, and special applications such as overhead glazing, balustrades and glass assemblies. Glass strength requirements are given for glazing, based on the tensile stresses developed on the surface of the glass....
AS 2812-2005 pdf free
AS 2812-2005 pdf free.Welding, brazing and cutting of metals - Glossary of terms. Thermal cutting using an are for melting the metal and a stream of air to remove the molten metal to enable a cut to be made The formation of a groove by means of air-arc cutting A welding process in which an aluminothermic reaction takes place within...
AS 1397-1993 pdf free
AS 1397-1993 pdf free.Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated. 1.1 SCOPE This Standard specifies requirements for hot-dipped zinc-coated or aluminium/zinc-coated steel sheet and strip, supplied in thicknesses up to and including 5.0 mm. This Standard specifies requirements for steel grades, coating classes and surface finish, as follows: (a)Three formability grades of steel (b)Six structural grades of steel...
AS/NZS 1594:1997 pdf free
AS/NZS 1594:1997 pdf free.Hot-rolled steel flat products. 1.1 SCOPE This Standard specifies requirements for hot-rolled steel plate, floorplate,sheet and strip, rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades and up to 16 mm for other grades, and for widths up to 2000 mm. It includes slit material, provided that the parent...