AS/NZS 1365:1996 pdf free.Tolerances for flat-rolled steel products. 1.1 SCOPE This Standard specifies dimensional tolerances for flat-rolled steels (uncoated, metallic-coated or organic-coated)， other than stainless, high alloy and quenched and tempered steels, as follows: (a)Wide slabs. (b Plate and floorplate rolled on a reversing mill. (C)Hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill (d)Cold-rolled sheet and strip....
AS/NZS 4680:2006 pdf free
AS/NZS 4680:2006 pdf free.Hot-Dip Galvanized (Zinc) Coatings On Fabricated Ferrous Articles. This Standard specifies requirements and tests for hot-dip zinc coatings on fabricated ferrous articles including structural steel, steel reinforcements, steel sheet fabrications, assembled steel products, tubular fabrications, fabricated wire work, steel forgings, steel stampings, ferrous castings, nails and other small components. This Standard applies to both centrifuged and non-centrifuged...
AS/NZS 4158:2003 (R2015) pdf free
AS/NZS 4158:2003 (R2015) pdf free.Thermal-bonded polymeric coatings on valves and fittings for water industry purposes. 1.1 SCOPE This Standard specifies the requirements for factory-applied thermal-bonded polymeric corrosion protective coatings(barrier coatings)。 For the purposes of this Standard, the term polymeric coating is intended to encompass both thermoplastic and thermosetting coating materials. which are used to coat both the internal and external...
AS/NZS 4442:1997 pdf free
AS/NZS 4442:1997 pdf free.Office desks.Now you can download AS/NZS 4442 pdf. 1.1 SCOPE This Standard sets out the requirements for the evaluation, design, and selection of office desks. It specifies minimum requirements for the function, strength durability and stability of office desks, leaving designers and manufacturers the maximum opportunity to develop suitable products. The Standard covers freestanding desks such as...
AS/NZS 5050:2010 pdf free
AS/NZS 5050:2010 pdf free.Business continuity - Managing disruption-related risk. The Standard describes the application of the principles, framework and process for risk management, as set out in AS/NZS ISO 31000: 2009, to disruption-related risk. Magaging such risk effectively will help maintain continuity of an organizations business. The approach has drawn on, but of necessity goes beyond, many of the concepts...
AS 2113.1-1998 (R2013) pdf free
AS 2113.1-1998 (R2013) pdf free.Oil of Australian eucalyptus - Part1:70 to 75% cineole. This specification lays down certain characteristics of oil of eucalyptus produced in Australia and containing 70 to 75 percent cineole. 3 DEFINITIONS For the purpose of this Standard, the definitions below apply. 3.1 Oil of Australian eucalyptus—the oil obtained by the steam distillation from foliage and branchiets...
AS/NZS 3744.2:1998 (R2013) pdf free
AS/NZS 3744.2:1998 (R2013) pdf free.Furniture - Assessment of the ignitability of upholstered furniture - Part2:Ignition source - Match-flame equivalent. AS/NZS 3744.2 is one of a series of standards concerned with the ignitability of upholstered furniture using various ignition sources. The ignition source used in this part of ISO 8191 is a gas flame which is equivalent to a match flame....
AS 1774.4.3-1998 (R2013) pdf free
AS 1774.4.3-1998 (R2013) pdf free.Refractories and refractory materials - Physical test methods - Part4.3:Preparation of test pieces - Unshaped refractories on site. This Standard describes the procedure for the preparation of’ test blocks on site from all types of unshaped refractory materials. NOTE: The values obtained from test pieces prepared using this method may not correspond with those obtained from...
AS/NZS 3744.3:1998 (R2013) pdf free
AS/NZS 3744.3:1998 (R2013) pdf free.Furniture - Assessment of the ignitability of upholstered furniture - Part3:Ignition sources - Nominal 160 mL/min gas flame and nominal 350 mL/min gas flame. 1 SCOPE This Standard sets out test methods to assess the ignitability of material combinations such as covers and fillings used in upholstered seating, when subjected to as flame ignition sources greater...
AS 2113.2-1998 (R2013) pdf free
AS 2113.2-1998 (R2013) pdf free.Oil of Australian eucalyptus - Part80:80 to 85% cineole. This specification lays down certain characteristics of oil of eucalyptus of 80 to 85 percent cineole content. 3 DEFINITIONS For the purpose of this Standard, the definitions below apply. 3.1 Oil of Australian eucalyptus-the oil obtained by the steam distillation from foliage and branchlets of any suitable...