ISO PDF Download

ANSI ESD STM11.12-2000 pdf free

ANSI ESD STM11.12-2000 pdf free.Volume Resistance Measurement of Static Dissipative Planar Materials. 7.0 Apparatus The equipment used for volume resistance measurements of static dissipative material Is described below 7.1 Electrode Assembly The electrode assembly consists of: A top electrode and a bottom electrode, See Figure 1 for System setup 7.1.1 Top Electrode The top electrode assembly consists of two concentric...

09-03

Download

ANSI BHMA A156.8:2000 pdf free

ANSI BHMA A156.8:2000 pdf free.DOOR CONTROLS - OVERHEAD STOPS AND HOLDERS. 2.2 Cycle Test 2.2.1 Single Point Adjustable Hold Open Types. Door holders with a single point hold open function shall be adjusted to withstand a minimum ofa 15 lbf (67 N) perpendicular to door in direction of closing, without releasing. Doors shall be mechanically pushed or pulled into hold...

09-03

Download

ANSI AIIM MS15:2000 pdf free

ANSI AIIM MS15:2000 pdf free.Dimensions and Operational Constraints for Single-Core Cartridge for 16 mm Processed Microfilm. 5.4.4 Terminators The leading end of the film shall not have terminators (or threading the film through the reader. 5.5 Separate leaders Use of separate leaders is optional. If a separate leader is used, the following requirements apply. 5.5.1 Dimensions Dimensions as to width,...

09-03

Download

ANSI T1.671:2000 pdf free

ANSI T1.671:2000 pdf free.Signaling System Number 7 (SS7)- Carrier Service Provider ldentification (CSPI). 5 Description of Network Capability 5.1 General Description When a calling party dials a called party number, the originating switch determines which carrier should handle the call as dialed. The originating switch then routes the call within or toward, that carrier’s network. Certain network services, such as...

09-03

Download

ANSI BHMA A156.18-2000 pdf free

ANSI BHMA A156.18-2000 pdf free.MATERIALS AND FINISHES. 3. FINISH TEST METHODS AND CRITERIA 3.1 Control Method: These test methods do not predict the performance Life of the finishes in actual use but are used as a quality control method to ensure consistent finish quality. Actual product components shall be used except where otherwise specified. 3.1.1 Significant Surfaces: Surfaces on which...

09-03

Download

AS NZS 4819:2003 pdf free

AS NZS 4819:2003 pdf free.Geographic information- Rural and urban addressing. 1.4.2 Address point A real or virtual spatially referenced point, characteristic feature or position, used to allocate geocode(s) to an address site (e.g.. parcel centroid. building centroid, access point. first boundary point, letterbox, frontage midpoint). 1.4.3 Address site An object, place or property. Unlike an address point, an address site...

09-03

Download

AS NZS 1462.28:2003 pdf free

AS NZS 1462.28:2003 pdf free.Methods of test for plastics pipes and fittings Method 28: Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds. 4 Procedure 4.1 Specimen preparation Two methods of preparation of test specimens are described: a compression procedure and a microtome procedure. 4.1.1 Compression procedure 4.1.1.1 Using a...

09-03

Download

ANSI CSA NGV2:2000 pdf free

ANSI CSA NGV2:2000 pdf free.BASIC REQUIREMENTS FOR COMPR ESSED NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS. Ultraviolet Resistance of Extemnal Coatings. Procctive coatings rquirvd to mcc soction 18.4 (Environmcntal Tcst) shall be cvalualcd for resistance to ulraviolat ellxcts using a minimum 1000 hours cxposurc in acordance with ASTM G53, Standard Practice for Operating LighI- (ud Wuler-Exposure Apparalus (Fluorescent UV-Condensation Type) for...

09-03

Download

ANSI B109.1:2000 pdf free

ANSI B109.1:2000 pdf free.DIAPH RAGM-TYPE GAS DISPLACEMENT M ETERS. 1.21 LIFE TEST, ACCELERATED. A test under controlled conditions simulating long-term operation designed to determine long-term maintenance and performance characteristics within a relatively short period of time. 1.22 MAOP. Maximum Allowable Operating Pressure equivalent to manufacturer's maximum working pressure. 1.23 METER ACCURACY. The degree to which a meter correctly measures the...

09-03

Download

ANSI B109.3:2000 pdf free

ANSI B109.3:2000 pdf free.ROTARY-TYPE GAS DISPLACEMENT METERS. 1.13 CONSTANT-PRESSURE-COMPENSATING INDEX. An index used in conjunction with a gas meter operated at a constant pressure, other than the contract base pressure, to indicate gas volume corrected to a contract base pressure. 1.14 CUBICFOOT, METERED. The quantity of gas that occupies 1 cubic foo when under pressure and temperature conditions existing in...

09-03

Download