AS 4822:2018 pdf free.External field joint coatings for steel pipelines. 3.1 APPLICATION PROCEDURE SPECIFICATION (APS) Prior to start of application and any agreed PQT and/or PPT (see Clauses 3.3 and 3.5), the APS shall be prepared (that is a compilation of documents related to the project-specific control of FJC), including the following: (a) A list of all PPE and detailed...
AS 1141.42:2017 pdf free – Pendulum friction test
AS 1141.42:2017 pdf free.Methods for sampling and testing aggregates Method 42: Pendulum friction test. 5.2 Conditioning new rubber sliders Condition two new rubber sliders on the day of the test as follows: NOTE: Two sliders are used in a test run to even out the effects of wear on a slider during a run and to facilitate differentiation between a...
AS 473:2017 pdf free
AS 473:2017 pdf free.Direct glazed automotive glass replacement—Light vehicles. 5.2 Direct glazing adhesive sealant systems methods Direct glazing adhesive sealant systems shall be used in accordance with the adhesive sealant manufacturer’s instructions. 6 REPLACEMENT OF DIRECT GLAZED AUTOMOTIVE GLASS 6.1 Competence Auto glaziers installing replacement automotive glass shall have a combination of training and experience, acquired knowledge and skills enabling...
AS NZS 1859.3:2017 pdf free
AS NZS 1859.3:2017 pdf free.Reconstituted wood-based panels—Specifications Part 3: Decorative overlaid wood panels. 2.1 DIMENSIONAL TOLERANCES When determined in accordance with AS/NZS 4266.1, the actual dimensions of substrate panels shall comply with the requirements of AS/NZS 1859. Parts 1, 2 and 4, as applicable. NOTES: 1 Flatness requirements are only applicable to decorative overlaid panels at time of delivery from...
AS NZS 1301.209:2017 pdf free
AS NZS 1301.209:2017 pdf free.Methods of test for pulp and paper Method 209: Laboratory processing of pulp— PFI mill method. 7.2 Thickening After disintegration, drain the pulp suspension on a Büchner funnel or other suitable device to a mass fraction between 11 % and 20 %. To avoid any loss of fibres, refilter the filtrate through the fibre mat, if...
AS NZS IEC 60331.2:2017 pdf free
AS NZS IEC 60331.2:2017 pdf free.Tests for electric cables under fire conditions- Circuit integrity Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0.6/1.0 kV and with an overall diameter not exceeding 20 mm. 5.5 Positioning of source of heat The burner face shall be...
AS NZS IEC 60331.1:2017 pdf free
AS NZS IEC 60331.1:2017 pdf free.Tests for electric cables under fire conditions—Circuit integrity Part1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0.6/1.0 kV and with an overall diameter exceeding 20 mm. 5.5 Positioning of source of heat The burner face shall be positioned in the...
AS 4730.1:2018 pdf free
AS 4730.1:2018 pdf free.Mining—Winding equipment Part 1: Winder control systems. 3.1 Requirements 3.1.1 Essential safety requirements 3.1.1.1 Fault, failure and abnormal condition detection The winder control system shall be designed to detect faults, failures and abnormal conditions that may adversely affect winder operation. 3.1.1.2 Speed and distance protection limits Winder control system limits shall be defined for travel, speed, and...
AS 5013.11.4:2018 pdf free
AS 5013.11.4:2018 pdf free.Food microbiology Method 11.4: Microbiology of the food chain—Preparation of test samples, initial suspension and decimal dilutions for microbiological examination—Specific rules for the preparation of miscellaneous products (ISO 6887-4:2017/ MOD). 9.1.2 Apparatus Plastic bags with filter inserts (6.1.2) are recommended to assist in the pipetting of products with substantial insoluble matter in suspension. 9.1.3 Preparation of samples...
AS NZS 4280.2:2017 pdf free
AS NZS 4280.2:2017 pdf free.406 MHz satellite distress beacons Part 2: Personal locator beacons (PLBs). 2.1 GENERAL 2.1.1 Terms and references This Section incorporates the minimum environmental and operational requirements for 406 MHz satellite personal locator beacons (PLBs). All references in this Section to PLBs or beacons shall mean 406 MHz satellite personal locator beacons. 2.1.2 Basic construction requirements The...