ISO PDF Download

AS 1735.12:2020 pdf free – Facilities for persons with disabilities

AS 1735.12:2020 pdf free.Lifts, escalators and moving walks Part 12: Facilities for persons with disabilities (EN 81-70:2018, MOD). 5 Safety requirements and/or protective measures 5.1 General 5.1.1 Passenger and goods passenger lifts shall comply with the safety requirements and/or protective measures of the following clauses. In addition, passenger and goods passenger lifts shall be designed according to the principles of...

09-02

Download

AS ISO 5353:2020 pdf free

AS ISO 5353:2020 pdf free.Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point. 5 Technical requirements 5.1 Device for seat index point (SIP) determination The device for determining the SIP shall comply with figure 1. The mass of the device shall be 6 kg ± 1 kg. The work surfaces of the device shall be...

09-02

Download

AS 1172.4:2019 pdf free

AS 1172.4:2019 pdf free.Sanitary plumbing products Part 4: Washbasins. 1.5.5 Waste outlet The waste outlet hole shall incorporate a flange recess that allows the installation of a waste fitting conforming with AS 1589 or AS 2887 such that the fitting permits the drainage of the basin. 1.5.6 Support and rigidity The washbasin shall provide for a means of secure support...

09-02

Download

AS NZS 1301.421:2020 pdf free

AS NZS 1301.421:2020 pdf free.Method of test for pulp and paper Method 421: Paper, board and pulps一 Determination of pH of aqueous extracts一Cold extraction. 8.1 Weighing Weigh 2,0 g ± 0,1 g of air-dry sample (6.2) in a 250 ml flask (5.1). NOTE Since the amount of sample is not critical, there is no need to determine the dry matter...

09-02

Download

AS ISO 3411:2020 pdf free

AS ISO 3411:2020 pdf free.Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope. 5 Minimum operator space envelope 5.1 General The minimum operator space envelope is the interior dimension of the operator’s enclosure. The minimum operating space envelope around the operator for operator enclosures (e.g. cabs, ROPS, FOPS) is shown in Figure 4 for a seated operator...

09-02

Download

AS 3011.2:2019 pdf free – Part 2: Sealed cells

AS 3011.2:2019 pdf free.Electrical installations一Secondary batteries installed in buildings Part 2: Sealed cells. 2.2.6 Luminaires Battery room lighting shall be installed in accordance with AS/NZS 1680.1. Luminaires shall be installed in the middle of aisles and at a minimum distance of 200 mm from any part of a battery. Luminaires shall be a fully enclosed fitting. Luminaires shall not be...

09-02

Download

AS 1289.6.6.1:2020 pdf free – Methods of testing soils for engineering purposes

AS 1289.6.6.1:2020 pdf free.Methods of testing soils for engineering purposes Method 6.6.1: Soil strength and consolidation tests一Determination of the one-dimensional consolidation properties of a soil一Standard method. Continue the readings until the slope of the characteristic linear secondary portion of the thickness versus log-of-time plot is obvious, see Clause 8.1 and Figure 1. For soils that have slow primary consolidation, loads...

09-02

Download

AS 4428.3:2020 pdf free

AS 4428.3:2020 pdf free.Fire detection, warning, control and intercom systems — Control and indicating equipment Part 3: Fire brigade panel. 2.1 General FBPs shall meet the requirements of this Section, and the requirements and tests set out in AS 7240.2. The requirements in this Section shall be verified by visual inspection or engineering assessment as appropriate. In addition, the following...

09-02

Download

AS 1301.402:2019 Methods of test for pulp and paper Method 402: Statistical monitoring of test systems for paper and paper board

AS 1301.402:2019 pdf free.Methods of test for pulp and paper Method 402: Statistical monitoring of test systems for paper and paper board. 4 Principle For a particular test, a series of randomized samples of reference material is prepared such that measurements can be made at a minimum of two, but preferably three, levels over the working range of the test...

09-02

Download

AS 1528.4:2019 pdf free – Clamp tube fittings

AS 1528.4:2019 pdf free.Stainless steel tubes and tube fittings for food processing and hygienic applications Part 4: Clamp tube fittings. 12 Surface finish 12.1 External surfaces The external surfaces of the components shall be finished smooth by machining or polishing or both. The fittings, including the threads, shall be free from burrs. 12.2 Internal surfaces The product-contacting surfaces of the...

09-02

Download