ISO PDF Download

AS 5246.1:2021

AS 5246.1:2021 pdf free.Cranes - Classification Part 1: General (ISO 4301-1:2016, MOD). 5.2 Use of classification for commercial specification The classification is applied by the purchaser and the manufacturer of a crane and/or load lifting attachments, between which agreement is necessary on the duty of the crane. The classification thus agreed is intended for contractual and technical reference purposes. It...

09-08

Download

AS 4685.3:2021

AS 4685.3:2021 pdf free.Playground equipment and surfacing Part 3: Additional safety requirements and test methods for slides (EN 1176-3:2017, MOD). For attachment slides where the platform is used as the entire starting section, the requirements for protection against falling in EN 1176-1:2017, 4.2.4, apply. For free-standing slides, the guarding section shall have a height of at least that required for...

09-08

Download

AS ISO 7240.24:2018

AS ISO 7240.24:2018 pdf free.Fire detection and alarm systems Part 24: Fire alarm loudspeakers. 5.1.2 Operating conditions for tests 5.1.2.1 Unless otherwise stated in a test procedure, the test specimen shall be a) set to its highest power setting, b) preconditioned in accordance with Annex A, and c) mounted in the acoustical environment as described in Annex A and as...

09-08

Download

AS ISO 7240.8:2018 pdf free – Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor

AS ISO 7240.8:2018 pdf free.Fire detection and alarm systems Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor. 5.1.5 Measurement of CO response value 5.1.5.1 Install the specimen for which the CO response value is to be measured in a gas test chamber, as specified in Annex A, in its normal operating position,...

09-08

Download

AS 8001:2021

AS 8001:2021 pdf free.Fraud and corruption control. 2.5 Line management Organizations shall communicate to all line managers a mandatory accountability for promptly reporting fraud and corruption matters that come to their attention. Organizations shall ensure that line management personnel are fully aware that managing fraud and corruption is as much part of their responsibility as managing other types of enterprise...

09-08

Download

AS 5227.1:2021 pdf free – Cranes – Requirements for mechanisms Part 1: General

AS 5227.1:2021 pdf free.Cranes - Requirements for mechanisms Part 1: General (ISO 10972-1:1998, MOD). 4.3 Couplings 4.3.1 General Selection of the type of coupling shall be made on the basis of the general design of the mechanism, its use and performance required in order to avoid vibrations and unwanted reactions. Alignment shall comply with the supplier’s instructions. When necessary, rotating...

09-08

Download

AS ISO 9248:2021 pdf free – Earth-moving machinery

AS ISO 9248:2021 pdf free.Earth-moving machinery - Units for dimensions, performance and capacities, and their measurement accuracies. 1 Scope This International Standard specifies basic units, symbols and tolerances for the measurements of general machine dimensions, performance and capacities of earth-moving machinery as defined in ISO 6165. It does not cover methods and instrumentation to be used. 2 Normative reference The...

09-08

Download

AS IEC 60060.2:2018 pdf free High-voltage test techniques Part 2: Measuring systems

AS IEC 60060.2:2018 pdf free.High-voltage test techniques Part 2: Measuring systems. According to the ISO/IEC Guide 98-3, the uncertainty of a measurement is determined by combining the uncertainty contributions of Type A and Type B (see 5.10, 5.11 and Annex A). The contributions are obtained from measurement results, from manufacturers’ handbooks, calibration certificates and from estimating reasonable values of the...

09-08

Download

AS ISO 8813:2021

AS ISO 8813:2021 pdf free.Earth-moving machinery- Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom. 4.3.2 Wheeled machines Preliminary calculations shall be made using load overhang lines defined in 3.5 with the machine steered straight ahead, steered fully left, and steered fully right. These preliminary calculations shall be used to select the steering position that results...

09-08

Download

AS 4055:2021

AS 4055:2021 pdf free.Wind loads for housing. 1.3 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. NOTE Documents referenced for informative purposes are listed in the Bibliography. AS/NZS 1170.2, Structural design actions, Part 2: Wind actions 1.4 Terms and definitions For...

09-08

Download