ISO PDF Download

AS 2210.2:2019 pdf free – Test methods for footwear

AS 2210.2:2019 pdf free.Personal protective equipment Method 2: Test methods for footwear. Section 3 Terms and definitions For the purposes of this document, the terms and definitions given in Iso 20345 and ISO 20347 apply. Section 4 Sampling and conditioning 4.1 Sampling The minimum number of samples to be tested in order to check compliance with the requirements specified in...

09-08

Download

AS NZS 61786.1:2021

AS NZS 61786.1:2021 pdf free.Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Part 1: Requirements for measuring instruments (IEC 61786-1:2013 (ED.1.0) MOD). 5.1 General When measuring field in the context of assessment of human exposure, the following items are considered below: — measurement of the...

09-08

Download

AS ISO 9906:2018 pdf free – Rotodynamic pumps一Hydraulic performance acceptance tests

AS ISO 9906:2018 pdf free.Rotodynamic pumps一Hydraulic performance acceptance tests一 Grades 1, 2 and 3. 3.1.1.2 factory performance test pump test performed to verify the initial performance of new pumps as well as checking for repeatability of production units, accuracy of impeller trim calculations, performance with special materials, etc. Note 1 to entry: A typical performance test consists of the measurement...

09-08

Download

AS 3533.4.4:2018 pdf free – Amusement rides and devices

AS 3533.4.4:2018 pdf free.Amusement rides and devices Part 4.4: Specific requirements- Hire go-karts. 2.1 CLASSIFICATION Notwithstanding the classification system of AS 3533.1, hire go-karts and tracks designed to this Standard shall be deemed as Class 2 devices. 2.2 HAZARD IDENTIFICATION, RISK ASSESSMENT AND CONTROL OF RISK In designing a go-kart, a designer is required to— (a) identify hazards associated with...

09-08

Download

AS NZS 4234:2021

AS NZS 4234:2021 pdf free.Heated water systems一Calculation of energy consumption一Parameters and outcomes for software simulations. Detail heat pump operating times , other time control or other strategy (provide separate description of control logic if strategy is not simple time control). Detail supplementary heating times , other time control or other strategy (provide separate description of control logic if strategy is...

09-08

Download

AS 1670.4:2018

AS 1670.4:2018 pdf free.Fire detection, warning, control and intercom systems- System design, installation and commissioning Part 4: Emergency warning and intercom systems. 3.1 General Components and other equipment shall be installed in locations that will not prejudice their performance and reliability. Components shall be installed so that the correct performance is maintained.. Access for servicing all components shall be provided....

09-08

Download

AS 13100:2021

AS 13100:2021 pdf free.AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations. An Organization carrying out the purchase, storage, splitting or sale of products without affecting product conformity. Distributors are limited to Raw Materials, Industry Standard Parts, and Commercial-Off-The-Shelf (COTS) items. ELECTRONIC - FIRST ARTICLE INSPECTION REPORT (e-FAIR) An electronic application, typically customer owned and/or controlled, that...

09-08

Download

AS NZS 2040.2:2021

AS NZS 2040.2:2021 pdf download.Performance of household electrical appliances一Clothes washing machines Part 2: Energy efficiency labelling requirements. 2.1 General 21.1 Introduction This Section sets out the test requirements, equations and procedures for calculating values of the comparative energy consumption (CEC) and star rating, which appear on an energy rating label. The process consists of measuring the tested energy consumption (Et)...

09-08

Download

AS ISO 12742:2021 pdf free

AS ISO 12742:2021 pdf free.Copper, lead and zinc sulfide concentrates一Determination of transportable moisture limits一Flow-table method. 7 Procedure 7.1 General Copper, lead and zinc concentrates can undergo rapid changes in moisture when exposed to air, so all stages of the test should be accomplished in the shortest time period and shall be completed within the day of commencement. Where possible, sample...

09-08

Download

AS 62052.11:2018

AS 62052.11:2018 pdf free.Electricity metering equipment (ac)- General requirements, tests and test conditions Part 11: Metering equipment (IEC 62052-11:2016 (ED.1.1) MOD). 5.10 Display of measured values The information can be shown either by an electromechanical register or an electronic display. In the case of an electronic display the corresponding non-volatile memory shall have a minimum retention time of four months....

09-08

Download