ISO PDF Download

AS ISO 9248:2021 pdf free.Earth-moving machinery - Units for dimensions, performance and capacities, and their measurement accuracies. 1 Scope This International Standard specifies basic units, symbols and tolerances for the measurements of general machine dimensions, performance and capacities of earth-moving machinery as defined in ISO 6165. It does not cover methods and instrumentation to be used. 2 Normative reference The...

AS ISO 8813:2021 pdf free.Earth-moving machinery- Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom. 4.3.2 Wheeled machines Preliminary calculations shall be made using load overhang lines defined in 3.5 with the machine steered straight ahead, steered fully left, and steered fully right. These preliminary calculations shall be used to select the steering position that results...

AS ISO 6302:2021 pdf free.Earth-moving machinery一Drain, fill and level plugs. 1 Scope This International Standard establishes the types, shapes and sizes of the parts of the plugs used in connection with the hand tools listed in ISO 4510-1 to permit easy removal and installation of plugs at the work-site. It does not set requirements, i.e. dimensions and materials, for the...

AS ISO 16714:2021 pdf free.Earth-moving machinery一Recyclability and recoverability一Terminology and calculation method. In order to be recyclable, a component part or material shall be linked to a proven recycling technology. At this step, at least the following machine component parts, materials or both shall also be taken into account: — engine; — hydraulic circuit components (hydraulic pump, hydraulic control valve, swing...

AS ISO 6015:2021 pdf free.Earth-moving machinery一Hydraulic excavators and backhoe loaders一Methods of determining tool forces. 4 Measurement methods 41 Test site and general The test site shall consist of a level, hard surface, with anchor points and space for using the measuring devices specified in 4.2.1 to 4.2.3. For measurements made below the ground plane, a space below that plane is...

AS ISO 8925:2021 pdf free.Earth-moving machinery-Diagnostic ports. 1 Scope This International Standard defines the sizes, types and accessibility of diagnostic ports for use in measuring fluid temperature, pressure and flow, and to obtain fluid samples. It also sets out the requirements for accessibility to the port. It applies to earth-moving machinery as defined in ISO 6165, and gives general guidelines...

AS ISO 8812:2021 pdf free.Earth-moving machinery - Backhoe loaders - Terminology and commercial specifications. 3.5 attachment assembly of components (3.6) that can be mounted onto the base machine (3.2) or equipment (3.3) for specific use 3.6 component part or an assembly of parts of a base machine (3.2), equipment (3.3), or an attachment (3.5) 3.7 Masses 3.7.1 operating mass OM...

AS ISO 9533:2020 pdf free.Earth-moving machinery一Machine- mounted audible travel alarms and forward horns一Test methods and performance criteria. 4 Apparatus 4.1 Sound level meter with an extension cable or equivalent sound measurement system that meets the performance requirements of IEC 61672-1, Type 1. It is recommended that for the purposes of this International Standard all sound pressure level measurements be rounded...

AS ISO 6396:2020 pdf free.Earth-moving machinery—Determination of emission sound pressure level at operator's position—Dynamic test conditions. 6.3.3 Microphone mounting The microphone can conveniently be mounted on a frame or on the helmet, or on a shoulder harness worn by the operator. 6.3.4 Microphone vibration precautions Care shall be taken to isolate the microphone from vibrations which could affect the measurements....

AS ISO 9244:2020 pdf free.Earth-moving machinery一Machine safety labels一General principles. 4.6 Hazard severity panel 4.6.1 The hazard severity panel consists of a general warning sign followed by one of three signal words, as shown in Figure 4 (for colours, see 5.2). 4.6.2 The three signal words are DANGER, WARNING and CAUTION. Each alerts the viewer to the existence and relative seriousness...