AS 11801.6:2019 pdf free.Information technology—Generic cabling for customer premises Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD).
4 Conformance
For a cabling system to conform to this document the following applies.
a) The configuration and structure shall conform to the requirements outlined in Clause 5.
b) Channels shall meet the requirements specified in Clause 6 when subjected to
environment conditions, local to the channels (see NOTE below), as defined by the
applicable environmental Class(es) of Clause 6.
This shall be achieved by one of the following:
1) a channel design and implementation ensuring that the prescribed channel
performance of Clause 6 is met;
2) attachment of appropriate components to a permanent link or service concentration
point (SCP) link design meeting the prescribed performance class of Clause 7.
Channel performance shall be ensured where a channel is created by adding more
than one cord to either end of a link meeting the requirements of Clause 7;
3) for E1 environments, using the reference implementations of Clause 8 and compatible
cabling components conforming to the requirements of Clauses 9, 10 and 11, this is
based upon a statistical approach of performance modelling.
c) The interfaces to the cabling at the SO shall conform to the requirements of Clause 10
with respect to mating interfaces and performance when subjected to environment
conditions, local to the connecting hardware (see NOTE below), as defined by the
applicable environmental Class(es) of Clause 6.
d) Connecting hardware at other places in the cabling structure shall meet the performance
requirements specified in Clause 10 when subjected to environment conditions, local to
the connecting hardware (see NOTE below), as defined by the applicable environmental
Class(es) of Clause 6,
e) The requirements of ISO/IEC 14763-2 and ISO/IEC 30129 shall be met.
This document does not specify which tests and sampling levels should be adopted. Test methods to assess conformance with the channel and link requirements of Clause 6 and Clause 7, respectively, are specified in ISO/IEC 11801-1. The test parameters to be measured, the sampling levels and the treatment of measured results to be applied for particular installations shall be defined in the installation specifications and quality plan for that installation prepared in accordance with ISO/IEC 14763-2. In the absence of the channel, the conformance of the link shall be used to verify conformance with this document.AS 11801.6 pdf download.