AS 2359.1 Amdt 1-2017 pdf free.Powered industrial trucks Part 1: General requirements.
Section 4
1 First sentence, delete the text ‘AS 2369.6—2013’ and replace with ‘AS 2359.6—2013’.
2 Item (a), delete the text ‘ISO 6292’ and replace with ‘AS ISO 6292’.
3 Delete the text of Note 2 and replace with the following:
ISO/TR 29944 provides guidance on how the calculation for stopping distance as set out in AS ISO 6292 was developed.
Clause 6.4 (new)
Add new Clause 6.4 as follows:
6.4 FORK ARM EXTENSIONS
Fork arm extensions (slipper forks) shall support 100% of the load that is intended to be lifted. The horizontal load centre distance shall he 50% of the length of the fork arm extension.
Fork arm extensions shall comply with AS 2359.15—2005, Clause 6.
Clause 7.4.1
Sixth paragraph, delete the paragraph and replace with the following:
Where seatbelts are fitted they shall be interlocked to prevent the truck from travel motion (forward or reverse) until the seatbelt is buckled, except in the case of tow tractors. In addition, the seatbelt interlock shall include the sequencing/logic of the seatbelt switch with a seat pressure switch. The weight of the operator on the seat shall be detected prior to the seatbelt switch being engaged. The system shall not be readily overridden. Means shall be provided to discourage unbuckling of the seat belt while the truck is in motion. For example, activation of an audible alarm or switching to neutral. If it is developed in the future and it is deemed reasonably practicable, such technology may be fitted to tow tractors to control the risk of the operator or passenger being ejected.
Clause 15.4 In Item (b), delete‘AS 4972′ and replace with ISO 22915-9′. Appendix A, Paragraph A4 Delete the Paragraph title, text and the Figures A4.2. 1(A) through to A4.2.3(B)(2). Appendix E . In Paragraph E6，Item (a)，delete the text ISO 22915-21’and replace with ‘AS ISO 22915.21′.  In Item (b), delete the text ISO 22915-22′ and replace with ‘AS ISO 22915.22’.AS 2359.1 Amdt 1 pdf download.