AS NZS 62841.3.13:2018 pdf free.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery—Safety Part 3.13: Particular requirements for transportable drills.
8.14.1.101 Safety instructions for transportable drills Drill safety warnings
a) The drill must be secured. A drill that is not properly secured may move or tip over and may result in personal injury.
b) The workpiece must be clamped or secured to the workpiece support. Do not drill pieces that are too small to be clamped securely. Holding the workpiece by hand during operation may result in personal injury.
c) Do not wear gloves. Gloves may be entangled by the rotating parts or chips leading to persona! injury.
d) Keep your hands out of the drilling area while the tool is running. Contact with rotating parts or chips may result in personal injury.
e) Make sure the accessory is rotating before feeding into the workpiece. Otherwise the accessory may become jammed in the workpiece causing unexpected movement of the work piece and personal injury.
1) When the accessory is jammed, stop applying downward pressure and switch off the tool. Investigate and take corrective actions to eliminate the cause of the jam. Jamming can cause unexpected movement of the work piece and personal injury.
g) Avoid generating long chips by regularly interrupting downward pressure. Sharp metal chips may cause entanglement and personal injuries.
h) Never remove chips from the drilling area while the tool is running. To remove chips, move the accessory away from the workpiece, switch off the tool and wait for the accessory to stop moving. Use tools such as a brush or hook to remove chips. Contact with rotating parts or chips may result in personal injury.
i) Accessories with speed ratings must be rated at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.AS NZS 62841.3.13 pdf download.