BS EN 10283:2019 pdf free.Corrosion resistant steel castings.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1559-1:2011, Founding一Technical conditions of delivery一Part 1: General ! EN 1559-2:2014, Founding一Technical conditions of delivery一Part 2: Additional requirements for steel castings EN 10027-1, Designation systems for steels – Part 1: Steel names EN ISO 3651-2, Determination of resistance to intergranular corrosion of stainless steels- – Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels 一Corrosion test in media containing sulfuric acid (ISO 3651-2:1998) 3■Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http://www.electropedia.org/
ISO Online browsing platform: available at http://www.iso.org/obp 4■ Information to be supplied by the purchaser 5 Designations
In addition to EN 1559-2:2014: For a steel grade manufactured to different strength levels, according to the heat treatment, a suffix shall be added in accordance with EN 10027-1. 6 Manufacture 6.1 Manufacturing process 6.1.1 Melting In addition to EN 1559-2:2014: Alternative processes are left to the discretion of the manufacturer. 6.1.2 Heat treatment Unless otherwise agreed, the type of heat treatment represented by its symbol shall comply with Table 2. For some grades there are different options with different mechanical properties given in Table 2. 6.2 Welding operations 6.2.1■General NOTE For austenitic, fully austenitic and ferritic-austenitic (duplex) grades with a carbon content greater than 0,030 %, when welding cannot be followed by heat treatment as solution annealing (+AT), there may be a risk of intergranular corrosion. 6.2.2 Production welding In addition to EN 1559-2:2014:  –
information on preheat and interpass temperatures as well as on post weld heat-treatment and the corresponding welding groups as defined in EN ISO 11970 is given in Annex A.  6.3■Further processing BS EN 10283 pdf download.