BS EN 13210-1:2020 pdf free.Child care articles.Children’s harnesses, reins – Safety requirements and test methods.
BS EN 13210-1 This document specifies the minimum safety requirements and test methods for strap and/or fabric assemblies for restraining children from birth up to 48 months of age. These products are provided with a rein for use when the child is walking and/or with detachable straps for use in child care articles which are fitted with specified attachment points.This document does not cover backpacks with a leading rein which are covered in EN 13210-2. This
document does not apply to the following: restraint systems permanently fitted as an integral feature of child care articles;restraint systems intended for children with special needs; or restraint systems for use in motorized and power driven vehicles.If the product has other functions not covered in this document, reference should be made to the relevant European standard.2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 71-1, Safety of toys – Part 1: Mechanical and physical properties
EN 71-3:2019, Safety of toys – Part 3: Migration of certain elements.Inside the closed end of the bag is a rectangular metal bar, 260 mm long, 25 mm high and 6 mm wide, connected at the centre of its length to an eyebolt passing through an eyelet.The open end of the bag shall be sewn closed 50 mm from the bottom of the bag and clamped between two rectangular bars, of minimum dimensions 400 mm long, 25 mm high and 6 mm wide,each with four holes drilled at 160 mm and 180 mm from the centre of the bar and secured with nuts and bolts through the inner holes. Additional holes may be drilled in the bar to ensure that the bag is securely clamped. The outer holes enable the bottom of the dummy to be secured to the horizontal beam of the test frame (see Figure 5).BS EN 13210-1 pdf download.