BS EN 16147:2017 pdf free.Heat pumps with electrically driven compressors一Testing, performance rating and requirements for marking of domestic hot water units.
BS EN 16147 This European Standard specifies methods for testing, rating of performance and calculation of water heating energy efficiency of air/water, brine/water, water/water and direct exchange/water heat pump water heaters and heat pump combination heaters with electrically driven compressors and connected to or including a domestic hot water storage tank for domestic hot water production. This European Standard comprises only the testing procedure for the domestic hot water production of the heat pump system.NOTE 1 Testing procedures for simultaneous operation for domestic hot water production and space heating are not treated in this standard. Simultaneous means that domestic hot water production and space heating generation oCcur at the same time and may interact.NOTE 2 For heat pump combination heaters the seasonal efficiency of space heating is determined according to EN 14825. This European Standard only applies to water heaters which are supplied in a package of heat pump and storage tank. In the case of water heaters consisting of several parts with refrigerant connections, this European Standard applies only to those designed and supplied as a complete package. This European Standard does not specify requirements of the quality of the used water.In the case of heat pumps consisting of several refrigeration parts (split heat pumps) the following installation conditions shall be complied with for the tests: a) each refrigerant line shall be installed in accordance with the manufacturer’s instructions; the length of each line shall be between 5 m and 7,5 m; b] the lines shall be installed so that the difference in elevation does not exceed 2,5 m; c) thermal insulation shall be applied to the lines in accordance with the manufacturer’s instructions; d) unless constrained by the design at least half of the interconnecting lines shall be exposed to the outdoor conditions with the rest of the lines exposed to the indoor conditions.BS EN 16147 pdf download.