BS EN 17092-3:2020 pdf free.Protective garments for motorcycle riders,Class AA garments – Requirements.
BS EN 17092-3 Dimensional stability shall be assessed on the whole garment according to EN ISO 5077:2008. The sample shall be submitted to washing according to EN ISO 13688:2013, 5.2. The variation shall not exceed 5%.Assessment of dimensional stability is not required where only surface cleaning treatments, which are not considered to affect the performance of the garment, are recommended by the manufacturer. (For example, wiping with a damp sponge).Garments and samples shall be cleaned according to EN ISO 13688:2013, 5.2 prior to testing and shall conform to the requirements specified in Clauses 4.2 – 4.8 of this standard after the required number of cleanings, if applicable.For garments with removable mandatory or optional impact protectors, where according to the manufacturer’s instructions the protectors are to be removed prior to cleaning, the protectors shall be able to be reinstalled after cleaning.Cleaning is not necessary where only surface cleaning treatments, which are not considered to affect the performance of the garment are recommended by the manufacturer (e.g. wiping with a damp sponge).Impact protectors (see the definitions at 3.2, 3.3 and 3.4) shall be present in the garment according to Table 1.For garments with pockets for optional impact protectors, there shall be at least one type of impact protector that is available for each protector pocket. All impact protectors present in a garment, whether mandatory or optional, shall meet at least the Level 1 of the requirements according to the standards listed in Table 1. Pockets intended for impact protectors shall not contain any other items other than impact protectors complying with the applicable partof EN 1621.  EN 1621 impact protectors shall be positioned in the garment so that they cover the appropriate body part according to the relevant impact protector standard.Internal or external impact protectors present in or on garments shall be correctly positioned in or on the garment no matter which system is used to hold them in place.Garments, with impact protector pockets for location of optional impact protectors listed in the information notice for users, shall be manufactured to ensure correct positioning of the inserted impact.protector.BS EN 17092-3 pdf download.