BS EN 17092-6:2020 pdf free

05-04 comment

BS EN 17092-6:2020 pdf free.Protective garments for motorcycle riders Class C garments – Requirements.
BS EN 17092-6 SSS in the SSL of overgarments, which are on the exterior of the garment in Zone 1 and 2 (zones determined according to EN 17092-1:2020, 5.2) shall have at least one line of the stitching protected by an SSL material. Leather or textile abrasion overlays and reinforcements sewn onto the SSL shall have at least two rows of stitching attaching them to the SSL but are not required to have at least one line of stitching protected.  External rigid or semi-rigid reinforcements sewn into ( window stitched”) or onto the SSL shall have at least two rows of stitching attaching them to the SSL but are not required to have at least one line of stitching protected.The tensile strength of the Sss of garments, in the various zones, determined according to EN 17092-1:2020, 5.2 shall meet the requirements given in Table 3.Three test pieces of each seam or joint type, including all layers of materials of the garment that are present in the seam or joint, shall be tested according to the test procedure in EN 13594:2015 Annex B. Each type of seam or joint between materials forming the SSL shall be tested. The seam strength shall be calculated by dividing the breaking force by the length of the tested seam. The calculated value of each specimen of each seam type shall meet the minimum requirements given in Table 3.Where a seam joins the materials of two zones, the seam is subject to the higher of the two zone requirements, if applicable.Structural closures present in garments shall be tested according to the seam strength test procedure and shall meet the seam strength requirements of their respective zone. The structural closures themselves shall not fail anywhere along their length prior to meeting the zone seam strength requirement. If present, seams attaching structural closures to the garment shall also meet the seam strength requirements of their respective zone.
BS EN 17092-6 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information