BS EN 17375:2020 pdf free

05-09 comment

BS EN 17375:2020 pdf free.Electronic cigarettes and e-liquids -Reference e-liquids.
BS EN 17375 4.3.1 To perform tests, there are two reference e-liquids (see 4.3.2 and 4.3.3) and their composition is described in 4.3.4. 4.3.2  A reference e-liquid, termed 70/30, which contains propylene glycol (PG) (4.2.1) and glycerol (vegetable glycerine) (VG) (4.2.2) in a ratio of 7:3 respectively.4.3.3 A reference e-liquid, termed 50/50, which contains propylene glycol (PG) (4.2.1) and glycerol (vegetable glycerine) (VG]) (4.2.2) in a ratio of 1:1 respectively.  4.3.4 The compositions of the reference e-liquids are detailed in Table 1. Masses are expressed in g per 100 g, and are not corrected for purity of the particular ingredient. 4.4 Storage of reference e-liquids The maximum expiry date of the reference e-liquids is determined by the earliest expiry date of an individual ingredient. Reference e-liquids shall be stored under conditions that prevent alteration of their compositions. It is recommended to store at a temperature between 5。C and 25 °C, away from light sources, and in an airtight (preferably glass) container. Prior to use, the reference e-liquids shall be brought to ambient
room temperature. 5 Use of reference e-liquids 5.1 Selection of reference e-liquid Electronic cigarettes complying with the scope of this document shall be tested with one of the two
reference e-liquids listed in Table 1. The manufacturer shall justify the choice made between the two reference e-liquids; as a guide low power devices would be better suited to using the e-liquid with PG/VG 70/30 ratio, and high power devices would be better suited to using the e-liquid with the PG/VG 50/50 ratio. The product information available to the consumer shall indicate which reference e-liquid was used for the emissions testing. 5.2 Period of use after opening Reference e-liquids should be used within 24 h after opening if stored appropriately. E-liquids are hygroscopic. Exposing opened containers of e-liquids to ambient atmosphere might change their compositions, so exposure of the reference e-liquids to ambient atmosphere should be minimized.BS EN 17375 pdf download.

Download It Now Download Here
ATTENTION: I REALLY NEED YOUR SUPPORT.THANKS A LOT.
BS ISO 24081:2021 pdf download BS pdf free download

BS ISO 24081:2021 pdf download

BS ISO 24081:2021 pdf download.Ground cassava leaves (Isombe) — Specification. 1 Scope This document specifies requirements and methods of sampling and testing for ground cassava leaves, which are obtained from the processing of fresh cassava leaves (Manihot esculenta Crantz or Manihot glaziovii) intended for human consumption. 2 Normative references The following documents are referred to in the text in such...
Download

BS EN 1463‑2:2021

BS EN 1463‑2:2021 pdf download.Road marking materials — Retroreflecting road studs Part 2: Road test performance specifications. 4 Test sites and conditions 4.1 General Test sites shall be arranged at suitable locations that meet at least the requirements of 4.2 to 4.5. The test results will depend on the weather, traffic and road surface conditions. These shall all be described...
Download
BS ISO 3739‑2:2021 pdf download BS pdf free download

BS ISO 3739‑2:2021 pdf download

BS ISO 3739‑2:2021 pdf download.Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited...
Download

LEAVE A REPLY

Anonymous netizen Fill in information