BS EN 510:2019 pdf free.Specification for protective clothing for use where there is a risk of entanglement with moving parts.
4.2.1.2 Fastening requirements The garment shall be fastened by means having no exposed loose ends. The fastening elements shall be concealed. Folds caused by fastening elements shall lie on the inner side of the garment. After cleaning in accordance to 5.2 of EN ISO 13688:2013, the functionality of the fastening elements shall be checked by closing and opening manually the fastening elements five times. 4.2.1.3 Cuff and trouser lower-hem requirements Cuffs shall not have turn-ups. Lower hems of trousers or one-piece suits shall not have turn-ups. 4.2.1.4 Pocket requirements There shall be no external pockets. Any inside pocket of the garment above the waist shall not be provided with pocket openings on the outside and shall only be accessible from inside the garment. Any inside pocket of the garment below the waist with pocket openings on the outside shall be closable. 4.2.2 Additional design requirements in relation to the garment type 4.2.2.1 General The garment or garment ensemble shall consist of: a) waist jacket (see 4.2.2.2) with bib and brace overall (see 4.2.2.3) or b) waist jacket (see 4.2.2.2) with sleeveless coverall (see 4.2.2.4) or c) coverall with sleeves (see 4.2.2.4). Examples of possible designs are shown in Figure 1.If a side opening is required it shall be closable along the whole length of the side opening (e.g. touch- and-close fastener). The brace shall be sewn on the back and the effective length of the brace shall be adjustable. The buckles required for adjustment shall be sewn on the bib; they shall be so designed that the ends of the braces hang on the inner side of the bib. The braces shall be of extensible material. The width of the waist shall be adjustable by internal means. The trouser bottoms shall be adjustable to give a close fit.BS EN 510 pdf download.