BS EN ISO 9229:2020 pdf free.Thermal insulation – Vocabulary.
BS EN ISO 9229 set of a thermal insulation (3.4.1), a base coat, a reinforcement, a finishing coat and at least an adhesive or a mechanical fixing device, optionally a key coat and/or a decorative coat to be used according to further specification (i.e. sequence of layers, adhesive bonded area, adhesive coverage (3.6.12), thermal insulation thickness, anchor plate diameter, anchor setting position, anchor plate position perpendicular to substrate, anchor number per unit area, profiles and rails distance, base coat thickness, reinforcement overlap, key coat coverage, finishing coat thickness and decorative coat coverage) 3.4.2.3 ; exterior insulation finish system EIFS exterior wall system with capacity to provide heat, air and moisture control functions and, inclusive of a water resistive barrier assembly, thermal insulation (3.4.1) board, attachment method for securing the system to the substrate, and protected by a base coat material and glass fibre (3.5.11) reinforcing mesh installed over the face and termination surfaces of the thermal insulation board and completed with a finish material 3.4.3 technical insulation thermal insulation (3.4.1) required by building equipment (3.6.2) or industrial installation (3.6.3), e.g. for energy economy, safety of personnel or public, condensation or freezing prevention and the need to deliver or store fluids within specific temperature limits Note 1 to entry: Also known as industrial insulation for insulation systems applied only to industrial installation.assessment of factory production control action by a third-party organization, demonstrating that the factory production control (3.7.5) is in conformity with the requirements, based on initial inspection of the factory and the factory production control and continuous surveillance of it 3.7.7 certification of conformity action by a third-party certification body, demonstrating that a product conforms to a certification repository, with an appropriate level of trust 3.7.8 production batch definite quantity of some commodity manufactured or produced under conditions that are presumed uniform.maximum service temperature highest temperature at which the thermal insulation product (3.2.1), when installed at the recommended
thickness in a given application, continues to function within specified limits of performance 3.6.9.2 minimum service temperature lowest temperature at which the thermal insulation product (3.2.1), when installed at the recommended thickness in a given application, continues to function within specified limits of performance 3.6.9.3 service temperature range
temperature range between the maximum service temperature 3.6.9.1) and the minimum service temperature (3.6.9.2) BS EN ISO 9229 pdf download.