BS ISO 3862:2020 pdf free.Rubber hoses and hose assemblies —Rubbercovered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification.
BS ISO 3862 The impulse test shall be in accordance with ISO 6803 or ISO 6605. The test fluid temperature shall be 70 °C. The test fluid used shall be HFC, HFAE, HFAS or HFB as defined in ISO 6743-4.For type 4SP and 4SH hoses, when tested at a pressure equal to 133 % of the maximum working pressure, the hose shall withstand a minimum of 400 000 impulse cycles.For type R12 hoses, when tested at an impulse pressure equal to 133 % of the maximum working pressure, the hose shall withstand a minimum of 500 000 impulse cycles.For type R13 and R15 hoses, when tested at an impulse pressure equal to 120 % of the maximum working pressure, the hose shall withstand a minimum of 500 000 impulse cycles.There shall be no leakage or other evidence of failure before reaching the specified number of cycles.This test shall be considered a destructive test, and the test piece shall be discarded after the test.The following test can be used as an option to maximize test efficiency by reducing the amount of testing needed: a) oven-age assemblies flled with one of the water-based fluids specified in 7.4.2 for 120 h at 70 °C;b] impulse-test the aged assemblies using an oil-based hydraulic fluid as specified in ISO 6803 or ISO 6605 and the test conditions specified in ISO 6803 or ISO 6605. For type 4SP and 4SH hoses, when tested at a pressure equal to 133 % of the maximum working pressure and a temperature of 100。C, the hose shall withstand a minimum of 400 000 impulse cycles.For type R12 hoses, when tested at an impulse pressure equal to 133 % of the maximum working pressure and a temperature of 120。C, the hose shall withstand a minimum of 500 000 impulse cycles.For type R13 and R15 hoses, when tested at an impulse pressure equal to 120 % of the maximum working pressure and a temperature of 120。C, the hose shall withstand a minimum of 500 000 impulse cycles.There shall be no leakage or other evidence of failure before reaching the specified number of cycles.This test shall be considered a destructive test, and the test piece shall be discarded after the test.BS ISO 3862 pdf download.