BS ISO 6588-1:2020 pdf free.Paper, board and pulps – Determination of pH of aqueous extracts Cold extraction.
BS ISO 6588-1 This document specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of paper, board or pulp.
This document is applicable to all types of paper, board and pulp. As the quantity of extractable ionic material approaches zero, as in the case of highly purified pulps,the precision of the method becomes poor because of the difficulties encountered in making pH measurements on water containing little electrolytic material.Since the extraction in this document is performed with distilled or deionised water, the pH-value measured will sometimes be different e.g. for fully bleached pulp) from the pH-value measured under mill process conditions in which various types of process waters, e.g. chemically treated river water containing electrolytes, are used. In such cases, ISO 29681 should be used instead, as it is specifically applicable to bleached pulps from virgin fibres and to pulp samples having a low ionic strength for which the pH value will give more realistic results related to mill conditions than those obtained with
this document.For cellulosic papers used for electrical purposes, the method used should be that given in IEC 60554-2[4].The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 186, Paper and board一Sampling to determine average quality ISO 7213, Pulps一Sampling for testing 3 Terms and definitions
No terms and definitions are listed in this document.ISO and IEC maintain terminological databases for use in standardization at the following addresses:ISO Online browsing platform: available at https://www.iso.org/obp 一IEC Electropedia: available at http://www.electropedia.org/Extraction of a sample of2 g for 1 h with 100 ml of cold water of high purity. Filtration of the extract and addition of a salt solution. Measurement of the pH-value of the extract at a temperature between 20 °C and 25 °C.BS ISO 6588-1 pdf download.