ISO 9058:2008 pdf free.Glass containers — Standard tolerances for bottles.
This International Standard specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5000 ml.
NOTE This International Standard is based on CE.T.I.E [Centre technique international de I’embouteillage et du conditionnement (International Technical Centre for Bottling and Packaging), 1 12-114, rue La Boétie, 75008 Paris, France, http://www.cetie.org] data sheet DT 2 (1996) and EC Council Directive 75/107/EEC.
2 Normative references
ISO 7348:1992, Glass containers — Manufacture — Vocabulary
ISO 9009:1991, Glass containers — Height and non-parallelism of finish with reference to container base — Test methods.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in Iso 7348 and ISO 9009 and the following apply.
3.1
leading body diameter
greatest horizontal cross-sectional dimension of a container
4 Tolerances
4.1 Capacity tolerance
The actual capacity error (tolerance) shall be in accordance with the values specified in Table 1.
The maximum permissible error in the brimful capacity shall be the same as the maximum permissible error in the corresponding nominal capacity.
4.2 Nominal height tolerance, TH
The nominal height tolerance, in millimetres, shall be calculated using the following formula:
TH = ±(0,6+0,004H)
where H is the nominal height, in millimetres.
4.3 Nominal leading diameter tolerance, TD
The nominal leading body diameter tolerance, in millimetres, shall be calculated using the following formula:
TD = ± (0,5 + 0,012D)
where D is the nominal leading body diameter, in millimetres.